NSJC Message Board - Kids buggy...Driving video!....

NSJC Message Board
« Kids buggy...Driving video!.... »

Welcome Guest. Please Login or Register.
May 22, 2013, 1:06pm

NSJC Message Board :: Creepy Corner :: Fabrication and Rock Buggy :: Kids buggy...Driving video!....

« Page 12 of 15 » Jump to page Go

Author

Topic: Kids buggy...Driving video!.... (Read 13,602 times)

Zach "Hulltech Redneck"
member is offline

~If it aint broke, you're not trying hard enough~

[msn]

Joined: Feb 2009
Gender: Male

Posts: 547
Location: Porters Lake, NS
Karma: -2

Re: Kids buggy...getting creative!
« Reply #165 on Apr 30, 2012, 5:04pm »

looking good!!

Link to Post - Back to Top IP:

Logged

~If the women dont find you handsome, at least they'll find you handy~
1987 YJ Jacked on 37s waggy dana 44s, front tube fenders, 8000lb warn, running a beautiful 350sbc (with attitude), 5 speed, np231

2003 Corolla 5spd, DD

1996 Dodge Diesel, ext cab, 2wd, shes my fixer upper, and shes going to have stacks and a mean moose bumper

Hawkes
member is offline

[avatar]

Lurker

Joined: Feb 2005
Gender: Male

Posts: 5,253
Location: nearest Tim horton's
Karma: 49

Re: Kids buggy...getting creative!
« Reply #166 on May 2, 2012, 6:41am »

This will put a grin on your face when you see it! It's hard to tell the size until you see it in person, it is compact. Once it's out of the shop maybe Rico will take a pic next to his F150.

Link to Post - Back to Top IP:

Logged

DamnJeep
member is offline

Joined: Nov 2004
Gender: Male

Posts: 1,776
Karma: 30

Re: Kids buggy...getting creative!
« Reply #167 on May 6, 2012, 3:56pm »

May 2, 2012, 6:41am, Hawkes wrote:

This will put a grin on your face when you see it! It's hard to tell the size until you see it in person, it is compact. Once it's out of the shop maybe Rico will take a pic next to his F150.

Thanks.

Could not get it close to the truck as there is too much stuff in the way ::)

BUT I did get a picture next to my buggy!

Uploaded with ImageShack.us

Link to Post - Back to Top IP:

Logged

1992 YJ Sahara grill and a whole bunch of pipe.......with tires.....

Roadtripper
member is online

[avatar]

Eschew obfuscation.

Joined: Jan 2010
Gender: Male

Posts: 8,331
Location: East Chezzetcook
Karma: -75

Re: Kids buggy...Side by side!!
« Reply #168 on May 6, 2012, 4:03pm »

That's full pimpin' Rico. Those are the huge 31's like on your YJ back in the day. Post a pic of the YJ from back then, I am sure one of the photoshoppers in here would be able to do a side-by-side pic.

Link to Post - Back to Top IP:

Logged

2005 LJ Rubicon
6" LA, 1" BL, 35" KM2 on white Procomp steelies, Warn VR12000, RCVs, 4.88, Creepy winch bumper & Viair OBA. Hard top, soft top, 1/2 top, Safari top & NO top. Fuzzy Dice for entertainment only.

2006 Jetta TDI 5sp
Bone stock like the engineers intended.

Cannabis is less harmful than rum punch, whiskey, nicotine and glue, all of which are perfectly legal.

Sir Paul McCartney

DamnJeep
member is offline

Joined: Nov 2004
Gender: Male

Posts: 1,776
Karma: 30

Re: Kids buggy...Side by side!!
« Reply #169 on May 6, 2012, 5:54pm »

May 6, 2012, 4:03pm, Roadtripper wrote:

Wow. Thats a long time ago! BigJeep rockin' the 31's and a 2 1/2" Rancho lift! That was considered big then guys like Chad and Andrew with the 33's were CRAZY HUGE! Time's were simpler then

Link to Post - Back to Top IP:

Logged

1992 YJ Sahara grill and a whole bunch of pipe.......with tires.....

DamnJeep
member is offline

Joined: Nov 2004
Gender: Male

Posts: 1,776
Karma: 30

Re: Kids buggy...Side by side!!
« Reply #170 on May 6, 2012, 6:03pm »

The brake master Hawkes gave me. I had to make a bracket/pedal similar to the old dune buggy's style.

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Its mounted a bit lower than I wanted but will keep it for now.

Link to Post - Back to Top IP:

Logged

1992 YJ Sahara grill and a whole bunch of pipe.......with tires.....

Creepy
Administrator

member is offline

Joined: Nov 2004
Gender: Male

Posts: 16,623
Location: Dartmouth
Karma: -663

Re: Kids buggy...Side by side!!
« Reply #171 on May 6, 2012, 7:10pm »

awesome Rico. You do really nice work, that little rig looks great.

Link to Post - Back to Top IP:

Logged

CreepyCNC

'04 LJ Unlimited 2"/32"
'04 Ram 2500 CTD
'10 Jayco 17Z
'52 International COE L180

CNC plasma table and 3D pipe bending - pm for custom parts.

DamnJeep
member is offline

Joined: Nov 2004
Gender: Male

Posts: 1,776
Karma: 30

Re: Kids buggy...Side by side!!
« Reply #172 on May 17, 2012, 7:40pm »

Not too much progress lately. Trying to sort out fuel delivery problems as well as figure out the steering. Turned out the carb was covered in green death and the needle valves (jets) looked like a sea urchin! Nasty!

As for the steering. First let me say I HOPE this holds together! ::)

Since I have never heard of someone running full hydro off a 4 wheeler before I had to get a bit creative

Took the pull start off and modified the input wheel shaft thingy

to accept a V belt pulley.

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Then I made a mounting bracket...... Which of course didn't work the first time.... ::)

So on the third attempt I came up with this...

Uploaded with ImageShack.us

Bracket installed...

Uploaded with ImageShack.us

Lower pulley installed

Uploaded with ImageShack.us

Then I installed the modified XJ pump. I could not find the right pump with a V pulley so I machined the center from a serp pulley and welded a pulley I bought from PA.

Uploaded with ImageShack.us

Then I installed the hoses. All that's left is to make a oil tank.

Uploaded with ImageShack.us

Its the little things that are sooooo darn time consuming and FREAKING annoying! >:(

Link to Post - Back to Top IP:

Logged

1992 YJ Sahara grill and a whole bunch of pipe.......with tires.....

Creepy
Administrator

member is offline

Joined: Nov 2004
Gender: Male

Posts: 16,623
Location: Dartmouth
Karma: -663

Re: Kids buggy...full hydro steer!!
« Reply #173 on May 18, 2012, 3:27am »

Neat, nice and compact.
Looks like it supposed to be there.

Link to Post - Back to Top IP:

Logged

CreepyCNC

'04 LJ Unlimited 2"/32"
'04 Ram 2500 CTD
'10 Jayco 17Z
'52 International COE L180

CNC plasma table and 3D pipe bending - pm for custom parts.

dan
Membership Co-ord - Valley
member is offline

[avatar]

I prefer the term "half-flacid"

Joined: Jan 2008
Gender: Male

Posts: 2,964
Location: Paradise
Karma: 46

Re: Kids buggy...full hydro steer!!
« Reply #174 on May 18, 2012, 5:12am »

that's right cool. hopefully we will soon see some action shots of that thing!

Link to Post - Back to Top IP:

Logged

'95 YJ. waggy d44's with locking front hubs and fozzied front end, rear XJ SOA, front 4" YJ SUA springs, shackle reversal, and 35" Mickey Thompson MTZ's.
4.0 swapped in with 1" "MML", 1" rewelded body mount lift, boat-sides, flat belly, gas tank tucked up 5".

'95 Grand Cherokee V8 Orvis edition. '98 D44a rear, 2x4 rockers. rollin' on 235's.

zukwatson
buggy
member is offline

Joined: Mar 2012
Gender: Male

Posts: 126
Location: margeretsville
Karma: -1

Re: Kids buggy...full hydro steer!!
« Reply #175 on May 18, 2012, 5:34am »

hey rico, you weld the front and rear diffs? musta missed it if you did. but with the light weight and approx. 25 hp and half warn 31s you could prolly get away with the front locked. think your buggys gonna b able to follow it? lol

« Last Edit: May 18, 2012, 5:38am by zukwatson »

Link to Post - Back to Top IP:

Logged

sami buggy, 101" wheelbase,auto, doubler, 2 link front with 15" home made coilovers, 4 link rear on coils 15" travel shocks, yota axles,locked front and rear, trail gear cromos(for 3 trips), now longfields,now 38.5/16 tsls on 15" tmr beadlocks

Hawkes
member is offline

[avatar]

Lurker

Joined: Feb 2005
Gender: Male

Posts: 5,253
Location: nearest Tim horton's
Karma: 49

Re: Kids buggy...full hydro steer!!
« Reply #176 on May 18, 2012, 6:43am »

It will be interesting to see how the engine handles the load at idle. Worst case I suppose you could add a bicycle shifter to increase rpm while crawling and steering.

Link to Post - Back to Top IP:

Logged

bighair
member is offline

[msn]

Joined: Nov 2004
Gender: Male

Posts: 461
Karma: 3

Re: Kids buggy...full hydro steer!!
« Reply #177 on May 18, 2012, 8:52am »

hehe sweet Rico, very innovative on the hydro. hopefully the RPMS will be enough for good steering.

Link to Post - Back to Top IP:

Logged

da biznitch is da shiznit!

DamnJeep
member is offline

Joined: Nov 2004
Gender: Male

Posts: 1,776
Karma: 30

Re: Kids buggy...full hydro steer!!
« Reply #178 on May 18, 2012, 12:50pm »

May 18, 2012, 5:34am, zukwatson wrote:

Diffs not welded yet!

Hell! I've already spent more time on this buggy than my own so it probably will work better than mine!

Link to Post - Back to Top IP:

Logged

1992 YJ Sahara grill and a whole bunch of pipe.......with tires.....

DamnJeep
member is offline

Joined: Nov 2004
Gender: Male

Posts: 1,776
Karma: 30

Re: Kids buggy...full hydro steer!!
« Reply #179 on May 18, 2012, 12:52pm »

May 18, 2012, 6:43am, Hawkes wrote:

It will be interesting to see how the engine handles the load at idle. Worst case I suppose you could add a bicycle shifter to increase rpm while crawling and steering.

I was wondering the same thing. I can always turn up the idle I suppose....

Link to Post - Back to Top IP:

Logged

1992 YJ Sahara grill and a whole bunch of pipe.......with tires.....

« Page 12 of 15 » Jump to page Go

Visit the NS Jeep Club Homepage
Contact Administrator Click Here To Make This Board Ad-Free