|
Post by C Monster on Oct 2, 2012 20:48:02 GMT -4
|
|
badwithcomputer
Jeeper
You have DC2's? You just made a new best friend.
Posts: 2,863
|
Post by badwithcomputer on Oct 2, 2012 20:50:49 GMT -4
yep aluminum dick cheap-ek. I'll call those places tomorrow thanks Kevin!
|
|
badwithcomputer
Jeeper
You have DC2's? You just made a new best friend.
Posts: 2,863
|
Post by badwithcomputer on Oct 2, 2012 20:51:50 GMT -4
DAMN YOU CHRIS!!! now i must re live that horror of a day!
|
|
mangojk
Moderator
Trail Master - North Nova
Posts: 370
|
Post by mangojk on Oct 2, 2012 20:53:39 GMT -4
good luck
|
|
ronin
Jeeper
Out on the Mira
Posts: 661
|
Post by ronin on Oct 2, 2012 21:31:11 GMT -4
i found a thread on Pirate a while back about using the soft pellets and there was a chart as to how much weight to use depending on tire size . i have 35" Mikey Thompson MTZs on Bead locks with 10 oz of pellets in each , not a bit of vibration at any speed . Bought them at Walmart ,price was pretty good .
|
|
badwithcomputer
Jeeper
You have DC2's? You just made a new best friend.
Posts: 2,863
|
Post by badwithcomputer on Oct 3, 2012 9:12:08 GMT -4
how did you install the beads into the tire?
|
|
BILL
Jeeper
Posts: 3,029
|
Post by BILL on Oct 3, 2012 9:21:29 GMT -4
braek 1 side of the tire down and dump them in
|
|
|
Post by C Monster on Oct 3, 2012 9:22:27 GMT -4
break the tire off the rim put in the beads and set the tire side wall bead and air up the tire
|
|
badwithcomputer
Jeeper
You have DC2's? You just made a new best friend.
Posts: 2,863
|
Post by badwithcomputer on Oct 3, 2012 9:30:44 GMT -4
sounds like a lot of work.
|
|
BILL
Jeeper
Posts: 3,029
|
Post by BILL on Oct 3, 2012 10:19:51 GMT -4
its easy work
|
|
|
Post by itsakeeper on Oct 3, 2012 10:49:49 GMT -4
stainless steel balls work as well but are more expensive - I think Rob Cogswell is using #6 lead shot in his - another option
|
|
badwithcomputer
Jeeper
You have DC2's? You just made a new best friend.
Posts: 2,863
|
Post by badwithcomputer on Oct 3, 2012 11:05:20 GMT -4
I have balls of steel, but in my tires is not a good place for them I think I'll just call around on my lunch break to see what road force balancing them costs. I'll need an alignment too, maybe if i flash my pretty sh*t brown eyes they'll give me a deal. likely not.
|
|
|
Post by 53m38 on Oct 3, 2012 21:40:11 GMT -4
Won't the steel damage the inside of the tire?
|
|
mangojk
Moderator
Trail Master - North Nova
Posts: 370
|
Post by mangojk on Oct 3, 2012 22:35:24 GMT -4
Sometimes the tire doesn't seat properly to the rim and by breaking them down lube the beads and re-inflate tire to max air pressure it sometimes wheel help reduce vibration. That technique is used quite often on big truck tires especially on steer axles during PDI's following road test.
|
|
|
Post by itsakeeper on Oct 4, 2012 4:57:27 GMT -4
you can also break them down, rotate the tire on the wheel 90deg and rebalance
|
|