Repairing Steve's floor and front tube fenders
Oct 2, 2016 10:13:58 GMT -4
Enos, justajeep, and 1 more like this
Post by ronin on Oct 2, 2016 10:13:58 GMT -4
Repaired the torque box and floor on my son Steve's 2000 TJ a few years ago but rusted again
a call to 4 wheel parts had these at my door in a few days
after a lot of cutting and grinding
We also added tube fenders , Adam mac gave me the tubes already bent and I added the skins . I used plate from a heating oil tank . about 1/16th thick . local scrap yard cuts them out of old tanks and sells the sides for $5 . good deal
this is a grill guard we got from mudmagnet
cut off the fender guards
Steve grinding things down
as for the signal lights , I cut this part off the old fenders and welded up these brackets and we bolted them to the winch plate
a call to 4 wheel parts had these at my door in a few days
after a lot of cutting and grinding
We also added tube fenders , Adam mac gave me the tubes already bent and I added the skins . I used plate from a heating oil tank . about 1/16th thick . local scrap yard cuts them out of old tanks and sells the sides for $5 . good deal
this is a grill guard we got from mudmagnet
cut off the fender guards
Steve grinding things down
as for the signal lights , I cut this part off the old fenders and welded up these brackets and we bolted them to the winch plate
