|
|
Post by Johnniemac on Apr 12, 2006 11:01:39 GMT -4
I put an AMC360 in my CJ7 years ago. It had gobs of power vs. the 258 but the axles didn't care for it...
|
|
|
|
Post by wheeler dealer on Apr 12, 2006 12:33:29 GMT -4
that is true, i say the 350 will be a dune buggy project.
|
|
MudMagnet
Jeeper
heckler
covering Cape Breton, one Rock at a time!!!
Posts: 1,453
|
Post by MudMagnet on Apr 12, 2006 13:14:30 GMT -4
the 360 is so underpowered for a small block.... i would bet the 4l has more power, defitnally more torque... a 350 on the other hand.... that'd be nice in a jeep
|
|
Enos
Hardcore
Founding Member
Posts: 8,513 
|
Post by Enos on Apr 12, 2006 13:30:47 GMT -4
|
|
|
|
Post by Johnniemac on Apr 12, 2006 13:55:55 GMT -4
is/was 195HP/295torque. Keep in mind a 25 year old un-cared for motor will lose some energy
|
|
MudMagnet
Jeeper
heckler
covering Cape Breton, one Rock at a time!!!
Posts: 1,453
|
Post by MudMagnet on Apr 13, 2006 18:59:21 GMT -4
defitnally, any motor that old will never push the smae amount of power it did, not even close..... makes me wounder if my tow rig came with 135 hp and 270ft lb from the factory and its now at 510 000 km's  and 18years old what does it have now ;D just enough to pull a zuki.....lol.... in the process of doing dual elec fans and ram air intake.... hopfully give me decent power at 80km's/h pulling a trailer |
|
|
|
Post by BoggerYJ on Apr 26, 2006 21:32:46 GMT -4
My amc 360 has been "Freshened Up" 355hp 385ft/lbs got the print out  |
|
|
|
Post by Johnniemac on Apr 27, 2006 9:30:01 GMT -4
My old '20 would not have liked that engine much |
|
|
|
Post by Johnniemac on Aug 16, 2006 21:35:20 GMT -4
6.5" en-route. I didn't order a slipp yoke-e yet. H+T for me.Bobby take note you are my next stop after 3 cans of "foxpiss" penetrating fluid.  |
|
and 18years old what does it have now ;D just enough to pull a zuki.....lol.... in the process of doing dual elec fans and ram air intake.... hopfully give me decent power at 80km's/h pulling a trailer
