|
Post by troutfishin on Apr 6, 2005 17:41:26 GMT -4
looking for someone to design, and build me some floorpans for my 91yj. i live in woodside, so wondering if anyone has had good luck with mariner forge, and there quality of work. looking for good job. if i had a template i could probably make myself, i didnt know if there was a website.
thank aaron
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Apr 7, 2005 11:13:08 GMT -4
Mariner Forge are extremely good quality.
they wouldn't work on your rig, but they could make you a panel.
|
|
bill richards
Jeeper
Millwood Marauder
mud re-freshener
Posts: 4,169
|
Post by bill richards on Apr 7, 2005 11:17:45 GMT -4
Do you really need a panel made? Most times, new sheet metal is just cut and welded into place where needed. If you're really concerned about seeing the seems, you could always grind the welds down and cover it with a rocker guard type spray.
APJs does this all the time...
Bill
|
|
Shiny
Jeeper
Growing old is Inevitable, Growing up is Optional !
Posts: 1,331
|
Post by Shiny on Apr 8, 2005 16:48:36 GMT -4
what we found works good for seams is get the seam sealer from car quest($5/tube) and put in on with a body fill spreader (after you grind down the welds like bill said) and then lay the rock guard to er. youd be surprised on how good it comes out
|
|