|
Post by rnrjeep on Dec 27, 2004 23:46:45 GMT -4
Long hours spent in detailing this test run for a front bumper we are gonna make.......Dave Casey is the fabricator and is doin a great job .........Whad'ya think
|
|
|
Post by sportsguy on Dec 28, 2004 8:56:34 GMT -4
SHAZAM!
Sweet.
...does it come in a Comanche width...?
|
|
|
Post by rnrjeep on Dec 28, 2004 11:42:20 GMT -4
we're gonna price up the metal, Get into 'er and see what the results and prices are like. He'll factor in the time it takes to do em up...(hopefully with this template to get all the measurements from, it won't be so bad)........From there we'll see if any more can be done..... His will be two inches wider on each side and will be as wide as a YJ flare.I like mine just inside the YJ flare. Pics of the project will be updated as we go.
|
|
|
Post by subigon on Dec 28, 2004 11:46:07 GMT -4
Really like the looks of that bumper. Good work Dave.
|
|
|
Post by sportsguy on Dec 28, 2004 14:37:22 GMT -4
SHAZAM! Sweet. ...does it come in a Comanche width...? But are you guys making any for Cherokees and Comanches?
|
|
|
Post by rnrjeep on Dec 28, 2004 14:51:11 GMT -4
I think he's gonna see how the YJ ones go....IE - cost, time, results etc...... before any future plans are made. But I know him well....and I would say he could make anything for anything (if you know what I mean)....I will ask him if he plans to make more. I think that if all goes well for these ones , and it doesn't take three years to do one.....he will be able to make them for others (he can design and build to others individual specs based on this design as well...)....this one is for mine....his is going to actually have a "4x4" cut out and recessed with a turn signal light behind his. I will ask him to post his reply to your question K??
|
|
|
Post by itsakeeper on Dec 28, 2004 18:38:33 GMT -4
Damn, that's a good lookin bumper you got there
|
|
|
Post by sportsguy on Dec 28, 2004 21:46:28 GMT -4
I think he's gonna see how the YJ ones go....IE - cost, time, results etc...... before any future plans are made. But I know him well....and I would say he could make anything for anything (if you know what I mean)....I will ask him if he plans to make more. I think that if all goes well for these ones , and it doesn't take three years to do one.....he will be able to make them for others (he can design and build to others individual specs based on this design as well...)....this one is for mine....his is going to actually have a "4x4" cut out and recessed with a turn signal light behind his. I will ask him to post his reply to your question K?? Sounds good - no hurry.
|
|
|
Post by rnrjeep on Dec 28, 2004 21:51:44 GMT -4
just a test run of the prototype on one of our YJ's.......gonna add the tabs for the D-Shackles and lights when we figure out where we want them.
|
|
Sandboxcowboy
Jeeper
Oh yes, please tell me how deep that mud puddle was in beaver bank.....
Posts: 2,748
|
Post by Sandboxcowboy on Dec 29, 2004 0:12:48 GMT -4
How far does that stick out from grille to outer face of bumper???
TIA Justin
|
|
|
Post by subigon on Dec 29, 2004 0:18:07 GMT -4
All I got was a small box with the red X. I right clicked on it , then selected show picture and it appeared. Was it just the forum or is this machine of mine out of wack?
|
|
|
Post by sportsguy on Dec 29, 2004 3:20:16 GMT -4
Probably the forum Eddie - I've seen them from the get-go, so they are up and viewable.
Duane
|
|
|
Post by rnrjeep on Dec 31, 2004 1:13:10 GMT -4
GDFingJeep........... there is exactly six inches from the grill to the beginning of the bumper, and this particular bumper is six inches wide on the top. (for a total of twelve inches out from the grill ) It is 58 Inches in length and about 7.5 inches to the bottom before it curves under. But again, this is just made out of aluminum and can be adjusted as we go.
|
|
|
Post by sportsguy on Dec 31, 2004 6:24:54 GMT -4
But again, this is just made out of aluminum and can be adjusted as we go. Ah, aluminum - what thickness/gauge? It'd have to be well supported to hold up to some heavy duty winching and tow-strapping. I've heard of aluminum bumpers before, and even heard good things. I understand they can get pricey, but with the current price of steel, maybe it's worth it...dunno...
|
|
|
Post by dirtbean on Dec 31, 2004 11:17:01 GMT -4
|
|