|
Post by PATMAN on Mar 22, 2009 14:49:03 GMT -4
Finished the rear springs and brake lines on the XJ... sits up really nice now. Came inside for some food then I'll be back outside to finish the front. and there better be pics for us all to see...
|
|
|
Post by jeepfever on Mar 22, 2009 17:40:10 GMT -4
I got the YJ stuck in a snowbank at a trailhead. I had to walk home to get the Liberty to pull it out. Thank god I wasn't stuck further down the trail. I can't wait for spring weather to get here.
|
|
Plankton
Jeeper
1% evil, 99% hot gas
Posts: 949
|
Post by Plankton on Mar 22, 2009 18:31:43 GMT -4
Replaced the leaky Durango box with a rebuilt TJ box that (hopefully) won't leak for at least a few months.
Installed compressor and new belt to get the OBA project rolling. Tank and misc crap goes in next weekend.
While I was under the Jeep, I noted that my steering stabilizer is leaking. Guess tomorrow will be a drive to APJs.
|
|
|
Post by T-Dogg on Mar 22, 2009 21:03:37 GMT -4
Removed gas tank, rear bumper and exhaust,from Ol'Blue. Started front dissasembly, picked away @ removeiing fenders.
Had Ken and Whipper remove frame rail's to be placed into new Jeep ;D Thanks guys.
Rewelded frame supports on Grand.
Busy day
Da Dog
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Mar 23, 2009 0:12:11 GMT -4
LJ
|
|
|
Post by crazyfrog on Mar 23, 2009 6:19:39 GMT -4
Replace the daily driving light module 158.00 at the steelership. the circuit board is covered in silicone, no wonder they burn no where to dissipate heat.
|
|
|
Post by NSJeepster on Mar 23, 2009 16:33:26 GMT -4
Well I had a cracked headlight on the passenger side since I bought the jeep. Finally today the drivers headlight burns out. Go figure! So I go to Crappy and purchase two of the triple power Sylvania 60 /55 Watters. ;D Get home replace the drivers side then I said Ill keep the cracked as a spare for a quick fix if I happen to smash one Well I unscrewed the passenger side cracked lense and went to pull it out and it fell apart in two pieces Didnt check to see if it still worked or not. MONDAY!!!!
|
|
|
Post by PATMAN on Mar 23, 2009 16:35:50 GMT -4
i took the silencer outta my fart can muffler today, bolt was snapped in half, and the head of it was screwed up, looks like some jackass tried to steal it and then gave up when they couldnt.. pretty sad when this happens in broad daylight.. Now i know it dont seem like much but thats someone tryin to steal Sh*t off my rig, which is unacceptable....
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Mar 23, 2009 23:44:07 GMT -4
threw the viking soft top on, and put my spring wipers on. spring is here Ahhh so you are the one that jinxed us with this damn snow
|
|
4X4PLAY
Elite
~ P.O.R.N. FOR SALE ~
Posts: 11,763
|
Post by 4X4PLAY on Mar 24, 2009 10:30:10 GMT -4
I drilled out three sheared off hub bolts and I also picked up my rockrails from the powder coating guy...gots me some shweet rear LED lights and one length of 1 1/4" and one length of 1 1/2" pipe for my fender flares and Cindy and my stingers...grabbed a box o beer and hung out in MLC's garage Jeff
|
|
|
Post by Cherokee Chief on Mar 24, 2009 20:54:41 GMT -4
Did a bastard pack rear spring install from a Comanche tonight. Lifted the rear quite abit now I got to raise the front some more. Yay no more bottoming out ;D
|
|
T
Jeeper
Posts: 402
|
Post by T on Mar 25, 2009 10:53:26 GMT -4
Finished putting the rest of the front lift on the XJ. Now just trying to sort out my stopping issues.
|
|
|
Post by PATMAN on Mar 25, 2009 14:18:01 GMT -4
Finished putting the rest of the front lift on the XJ. Now just trying to sort out my stopping issues. dammmit boy wheres the effin pics lol
|
|
|
Post by tothewall on Mar 25, 2009 14:22:43 GMT -4
Gonna do an install on a CB antenna spring tomorrow evening. Looking forward to some wheelin soon.
|
|
|
Post by ©Big6™ on Mar 25, 2009 14:41:00 GMT -4
Replaced the leaky Durango box with a rebuilt TJ box that (hopefully) won't leak for at least a few months. Installed compressor and new belt to get the OBA project rolling. Tank and misc crap goes in next weekend. While I was under the Jeep, I noted that my steering stabilizer is leaking. Guess tomorrow will be a drive to APJs. Did you have to return the old box as a core?
|
|