BILL
Jeeper
Posts: 3,029
|
Post by BILL on Jan 11, 2012 10:45:55 GMT -4
i got a set of those laying here i thought about installing on my rear of the tj
|
|
|
Post by Scorpion King on Jan 11, 2012 12:45:49 GMT -4
Yeah the factory hooks should bolt on until you decide to go with something else
|
|
|
Post by tricountykustomz on Jan 11, 2012 16:58:48 GMT -4
never thought of re-using the factory hooks...might have to try that tonight....i did plan on picking up some D-rings...but a fairlead is first on my list.
and yes...i do need to try out the winch shortly...does patrick have a jeep yet? lol
|
|
|
Post by Good Robot on Jan 11, 2012 18:02:55 GMT -4
I have an old fairlead kicking around here... However, it's not a roller fairlead like you probably want.
|
|
|
Post by Good Robot on Jan 11, 2012 18:09:44 GMT -4
|
|
|
Post by Scorpion King on Jan 11, 2012 20:06:49 GMT -4
That's my buddy Del... you make a deal with him and I can bring the fairlead with me to the Hali airport next week if it helps.
|
|
|
Post by tricountykustomz on Jan 11, 2012 20:22:48 GMT -4
thanks for the info...but getting to the hfx airport is the only prob...that's 3.5 - 4 hours away lol...i have a fairlead comming from pecks anyway
|
|
|
Post by Scorpion King on Jan 11, 2012 21:03:50 GMT -4
Cool... no worries. Thought there may have been a connection for you from Hali to Yarmouth that I could have at least brought it that far JK's looking good
|
|
|
Post by tricountykustomz on Jan 29, 2012 19:56:50 GMT -4
well..finally got off my tail today and finished up my diff guard i picked up...blasted it down and powder coated it a textured black to match the rest of the parts i've been putting on my jeep. i know it's a poor pic...but what can you expcet from a crackberry lol
|
|
|
Post by tricountykustomz on Feb 21, 2012 21:16:13 GMT -4
gee's...looking at the start of this thread it was going great...now i'm looking at it and seeing a couple crappy pics with limited captions lol....and now to get worse....haven't had a chance to take a good pic but dropped a rough country track bar in the jeep this weekend, made a huge improvement. pics will be up shortly
|
|
|
Post by tricountykustomz on Apr 14, 2012 18:04:20 GMT -4
got creative today and finally finished up my cb antenna mount...had to be able to pivot as it stick's up higher then the door on my garage...so i found a hood hinge from my 1995 neon i used to own that was begging to be chopped up lol. after some cutting, grinding, sandblasting and powder coating, i finally have a mount that works great. it will tilt over to the drivers side and only 6" sticks out off to the side...more then enough room to get it back in the garage....and best of all, no tools needed....just angle it and go.....that spring is also there to keep it from flopping around...and yes, it works good lol
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Apr 14, 2012 21:56:01 GMT -4
ha, that's pretty good thinkin.
|
|
|
Post by Good Robot on May 10, 2012 5:08:29 GMT -4
Yup! Like that idea... i pull in my garage, and i hear "whack whack whack whack whack" every time from the antenna bouncing off my roof. Lets me know I'm in far enough.
|
|
|
Post by tricountykustomz on Nov 29, 2012 21:18:13 GMT -4
well...it's been age's since i've really upgraded anything on my jeep....but i've got something in the works and over the worst part...just thought i would give a little teaser of what's to come lol
|
|
iwonajeep
Jeeper
Jeepin is tasty says Buddy
Posts: 961
|
Post by iwonajeep on Dec 2, 2012 8:29:38 GMT -4
Yes, if that hood hinge were to be from a Cavalier would be Jeep bastadrdization. lol Good job Dave ha, that's pretty good thinkin.
|
|