90bronco
Jeeper
just smitin'
Posts: 3,415
|
Post by 90bronco on Jan 24, 2012 17:35:09 GMT -4
nice job , needs a creepy sticker though
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Jan 24, 2012 20:46:43 GMT -4
if the feet were on the blade, there would be zero support when it trips, it would dig in like crazy. These center of the feet are only 2.5" behind the plow. And supports the frame to stay up on the snow while the plow trips. feet in the air (mounted on the blade) do nothing to stop it from digging in. Maybe you see feet on the plow of other trip blades because they did it wrong. ;D We'll see. Thx for the comments.
|
|
|
Post by theonlybull on Jan 24, 2012 22:11:05 GMT -4
i think they figure when the blade is tripping, the cutting edge goes to a negative angle, so it doesn't want to dig in... heck, i've seen some, that would trip, unless they had a blade full of snow...... now that was annoying to plow with.
you know we're full of comments :-) but if this winter continues the way it's going, you won't even get to try it
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Jan 26, 2012 11:16:55 GMT -4
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Jan 26, 2012 11:39:42 GMT -4
Paint it !!!
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Jan 26, 2012 11:47:03 GMT -4
maybe a little.
there is a problem with the feet. they need to go inside some pipe so they don't flop. the tab they are mounted thru lets them flip back and dig into the soft ground. if it was frozen it would prob be ok, but its worth fixing.
the big winch raises and lowers the plow pretty quick, not like those little puny 2000# ones with a pully block. The 12000# is as quick as hydro.
pushed some dirt, the trip springs seem to be the proper rating. It pushes good, then when it hooks up solid, it takes some extra gas to get it to flip. it will stall the V8 before it trips from just above idle.Seems like it will work fine in that regard.
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Jan 26, 2012 11:50:54 GMT -4
I thought I mentioned using pipe to mount the shoes ? or double tab it
|
|
bill richards
Jeeper
Millwood Marauder
mud re-freshener
Posts: 4,169
|
Post by bill richards on Jan 26, 2012 12:03:33 GMT -4
redesign the foot with a bent up edge?
Bill
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Jan 26, 2012 12:13:38 GMT -4
I thought I mentioned using pipe to mount the shoes ? or double tab it If you did, I didn't catch on. Easy fix. Bill - the shoe is a cast plow foot, the error is in the mounting.
|
|
bill richards
Jeeper
Millwood Marauder
mud re-freshener
Posts: 4,169
|
Post by bill richards on Jan 26, 2012 12:49:44 GMT -4
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Jan 26, 2012 12:53:04 GMT -4
I have a set of those ones here , consiterably lighter , and dished out alot more then what Jan has now
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Jan 26, 2012 13:11:45 GMT -4
Would have made no difference. Its just dished a little more, still would have dug in. the mounting is the same....and that is the problem. Not the shape of the foot.
|
|
bill richards
Jeeper
Millwood Marauder
mud re-freshener
Posts: 4,169
|
Post by bill richards on Jan 26, 2012 13:20:44 GMT -4
little sensitive to any comments? I have no doubt that you have confirmed the problem is the mounting method. I offered up a different style of foot which may ALSO be of benefit...seeing as they are available, they must serve some purpose in life. I also brought it up because in the past I have noticed this same rounded style and can envision it being more forgiving on uneven surfaces... regardless of the mount.
Next time I'll reply with a simple "wow... great job jan".
Bill
|
|
kilo69
Jeeper
Coldstream Explorer
Posts: 1,528
|
Post by kilo69 on Jan 26, 2012 13:24:35 GMT -4
BILL JAN
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Jan 26, 2012 13:44:11 GMT -4
What the hell? Are you joking? I'm not looking for a handjob.
Changing the shoe would have made no difference to what is wrong. sorry if you don't like that. lol
|
|