4X4PLAY
Elite
~ P.O.R.N. FOR SALE ~
Posts: 11,763
|
Post by 4X4PLAY on Jan 30, 2014 10:06:15 GMT -4
Well I have already swapped in my 4.6 from the yj along with the ax15 and t case from the yj as well. I'm takin out the 44 that's in it (3.73) and takin the 8.8 that's in my yj (4.10s) and possibly the hp 30 instead of gearing the lp 30 and puttin them under since theyve been tortured And tested. I'm also giving the jeep a tummy tuck gonna try to get it flush with the frame with an extreme short sye. Have a few minor frame repairs to do where the skid plate bolts on and then I'll paint the frame and give the whole jeep a fresh coat of paint. Then I'm plannin on wheelin the crap out of it for the summer Welcome Jeremy, Looks like you have a good start on the Jeep with good plans!  Where are you getting your parts up that way?? Anyone selling off-road parts?? The reason I ask is I have a friend who is looking at starting a Line-X shop in New Glasgow and considering selling 4x4 and off-road parts and accessories (ricer stuff too). I have a bunch of wheeling friends in the Antigonish area, mostly Zuk and Yota guys but there is a Jeep or two in the mix... Good luck with your build! Cheers! Jeff  |
|
|
|
Post by C Monster on Jan 30, 2014 10:15:41 GMT -4
Well I have already swapped in my 4.6 from the yj along with the ax15 and t case from the yj as well. I'm takin out the 44 that's in it (3.73) and takin the 8.8 that's in my yj (4.10s) and possibly the hp 30 instead of gearing the lp 30 and puttin them under since theyve been tortured And tested. I'm also giving the jeep a tummy tuck gonna try to get it flush with the frame with an extreme short sye. Have a few minor frame repairs to do where the skid plate bolts on and then I'll paint the frame and give the whole jeep a fresh coat of paint. Then I'm plannin on wheelin the crap out of it for the summer welcome to the fun |
|
|
|
Post by stroked on Jan 30, 2014 10:20:08 GMT -4
No there is no offroad stores anywheres close so that would be awesome if your friend started something up close. As of now I do most of my shopping either from CVO or national 4wd in fredricton I know most of the Toyota and zuk guys around here I actually just rebuilt my girlfriends 86 samurai last winter Mays have seen it around.  |
|
|
|
Post by C Monster on Jan 30, 2014 10:24:42 GMT -4
Well I have already swapped in my 4.6 from the yj along with the ax15 and t case from the yj as well. I'm takin out the 44 that's in it (3.73) and takin the 8.8 that's in my yj (4.10s) and possibly the hp 30 instead of gearing the lp 30 and puttin them under since theyve been tortured And tested. I'm also giving the jeep a tummy tuck gonna try to get it flush with the frame with an extreme short sye. Have a few minor frame repairs to do where the skid plate bolts on and then I'll paint the frame and give the whole jeep a fresh coat of paint. Then I'm plannin on wheelin the crap out of it for the summer Welcome Jeremy, Looks like you have a good start on the Jeep with good plans! Where are you getting your parts up that way?? Anyone selling off-road parts?? The reason I ask is I have a friend who is looking at starting a Line-X shop in New Glasgow and considering selling 4x4 and off-road parts and accessories (ricer stuff too). I have a bunch of wheeling friends in the Antigonish area, mostly Zuk and Yota guys but there is a Jeep or two in the mix... Good luck with your build! Cheers! Jeff thats sound like a great ideal so i don'tt always got to drive to apj and cvo and some time pecks because I got no credit card I need to get my jeep hood and doors done line x just seen this place on kijiji any one know any thing about them novascotia.kijiji.ca/c-cars-vehicles-auto-parts-tires-other-parts-accessories-Suspension-Lift-Kits-W0QQAdIdZ497700943East Coast Off-Road, Trenton, NS www.facebook.com/EastCoastOffRoad |
|
|
|
Post by C Monster on Jan 30, 2014 10:29:28 GMT -4
|
|
|
|
Post by mostheman on Jan 30, 2014 10:30:07 GMT -4
I see the Crushing Gear and 500 Komatsu, you work for Alva?
|
|
|
|
Post by stroked on Jan 30, 2014 10:53:26 GMT -4
I see the Crushing Gear and 500 Komatsu, you work for Alva? No i actually work for Nova Construction/Pioneer Coal. and that's their 600 Komatsu but they have a 500 as well |
|
|
|
Post by mostheman on Jan 30, 2014 11:02:25 GMT -4
10-40 on the 600, I should have looked at the side of it instead of just guessing by bucket size.
|
|
skinypedalmasher
Jeeper
Secretary - North Nova
YJ..stock axles 35"Pitbull Rockers..305H.O motor...700R4..What will break first?
Posts: 1,164
|
Post by skinypedalmasher on Jan 30, 2014 11:15:21 GMT -4
Welcome to the board...Nova also has some Nice Macks LOL.
Hope to see your jeep and the zuke on the trails.
|
|
|
|
Post by stroked on Jan 30, 2014 11:17:12 GMT -4
Haha no worries i was just bein a smart ass. I don't run it. You coulda called it a skid steer I wouldn't have cared
|
|
|
|
Post by stroked on Jan 30, 2014 11:23:13 GMT -4
Welcome to the board...Nova also has some Nice Macks LOL. Hope to see your jeep and the zuke on the trails. Yea they do! I don't know about nice though haha |
|
|
|
Post by mostheman on Jan 30, 2014 12:02:42 GMT -4
Haha no worries i was just bein a smart ass. I don't run it. You coulda called it a skid steer I wouldn't have cared Do you work on the Crushing spread then? |
|
skinypedalmasher
Jeeper
Secretary - North Nova
YJ..stock axles 35"Pitbull Rockers..305H.O motor...700R4..What will break first?
Posts: 1,164
|
Post by skinypedalmasher on Jan 30, 2014 12:14:11 GMT -4
Your gonna fit right in the North Nova club..hahahahahaha
|
|
|
|
Post by stroked on Jan 30, 2014 12:45:28 GMT -4
Haha no worries i was just bein a smart ass. I don't run it. You coulda called it a skid steer I wouldn't have cared Do you work on the Crushing spread then? No I don't. I run excavators for them on road jobs doin ditching and cross culverts and in the winter when things get slack I drive a rock truck in the coal mine in stellarton |
|
|
|
Post by XJ Zone on Jan 30, 2014 12:46:42 GMT -4
Welcome aboard bud
Hope to see you on the trails
Stop down for a coffee sometime
|
|
