The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Jan 24, 2012 17:21:11 GMT -4
I see That the 12 ton pipe bender is on sale at PA For $99 . The 12 ton states that max thickness is 12 g and the 16 ton is 8g ( the dies are the same for both )
Which one are you guys using ? will I be fine with the 12 ton ?
|
|
rue
Jeeper
Buggy!
DARE YA
Posts: 2,022
|
Post by rue on Jan 24, 2012 18:03:58 GMT -4
I've always used the 12 ton.
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Jan 24, 2012 18:06:07 GMT -4
Awesome , thanks Rue I'll have to do the die mod too ? or is that only after its been used for a while ?
|
|
|
Post by theonlybull on Jan 24, 2012 18:21:19 GMT -4
do the mod right off the bat, unless you want lots of flattened pipe
|
|
|
Post by vanquish on Jan 24, 2012 19:42:26 GMT -4
Ya got me, what's the die mod?
|
|
badwithcomputer
Jeeper
You have DC2's? You just made a new best friend.
Posts: 2,863
|
Post by badwithcomputer on Jan 24, 2012 20:00:28 GMT -4
its the mod where you become immortal
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Jan 24, 2012 21:10:59 GMT -4
|
|
Big G
Hardcore
Posts: 5,146
|
Post by Big G on Jan 26, 2012 7:27:38 GMT -4
I read that if you just use a smaller die for your pipe you get the same results. Not sure what sizes, but you could always use some scrap and step down until it either works, or doesn't fit at all. If you get one, you should try it for the good of the group! ... before doing the mod on the dies that is.
|
|
|
Post by bhamm on Jan 26, 2012 18:52:54 GMT -4
Was anyone in to buy one, wondering if there are any left, I can't get in till this Sat.
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Jan 26, 2012 19:20:58 GMT -4
There were all kinds left , maybe 40
I decided to wait to get the air operated one , WAY EASIER !
|
|
iwonajeep
Jeeper
Jeepin is tasty says Buddy
Posts: 961
|
Post by iwonajeep on Jan 26, 2012 20:50:36 GMT -4
Way easier to have a friend with a tube shark than goin crazy with a kinker There were all kinds left , maybe 40 I decided to wait to get the air operated one , WAY EASIER !
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Jan 26, 2012 21:19:21 GMT -4
Way easier to have a friend with a tube shark than goin crazy with a kinker There were all kinds left , maybe 40 I decided to wait to get the air operated one , WAY EASIER ! But he / it , is missing the 1 in die
|
|
Highsider
Jeeper
If I only had the time
Posts: 357
|
Post by Highsider on Jan 27, 2012 0:19:19 GMT -4
Got one on the way and picked up a 48" high lift extreme while I was at it.
|
|
|
Post by bhamm on Feb 1, 2012 20:37:18 GMT -4
Got me a PA kinker ;D, now to scrounge supplies and parctice.
|
|
Big G
Hardcore
Posts: 5,146
|
Post by Big G on Feb 1, 2012 20:47:16 GMT -4
Tried mine for the 1st time.
1.25" pipe, "stock" die... pretty darn good. I'm gonna try shims and see if I can get it closer to perfect.
|
|