|
Post by C Monster on Mar 1, 2013 15:46:52 GMT -4
I took the dash cover off be the steering wheel and a lot of wires just fell out I found the problem what a** holes ! just taped the wire together when they put on the car alarm a little soldered and stuff and the wring is all back to stock
|
|
|
Post by C Monster on Mar 5, 2013 17:13:51 GMT -4
I put about 65 km on it and the cam bolt in the lower arms are all ways turning in them horseshoe things so bye bye cam bolts and made a Eliminator Kit and put in grade 8 bolts and all I can say is, this is the way a jeep should drive ;D loving the jk arms next thing to do is put on a longer rear brake hose on I got one from car quest for a 91 dodge 1/2 ton 4x4 parts number is sp9967 and it's 27 inches long
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Mar 5, 2013 20:42:52 GMT -4
I used the JK cam bolts , maybe thats why yours are coming loose ? factory TJ cams?
|
|
|
Post by C Monster on Mar 5, 2013 20:56:54 GMT -4
I used the JK cam bolts , may be thats why yours are coming loose ? factory TJ cams? I do not know why, it did it with the short arms too Yes they were the stock tj ones than came in my tj I did some google searching and it some thing that happens a lot
|
|
|
Post by C Monster on Mar 11, 2013 14:07:34 GMT -4
did some flexing today no fully flexed out , till I put on the new brake hose but it does flex great very happy with it ;D the front tire is a little over 4 feet off the ground
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Mar 12, 2013 13:50:39 GMT -4
Very nice flex shots! That should work great.
|
|
|
Post by C Monster on Mar 13, 2013 18:36:17 GMT -4
today I got a little done to it put on the rear longer brake hose and made up some new brake lines I did the take a photo of the line from the hose to the brake master cyl. all so remove the 4 inch lift front and 3.50 lift coil springs and put back in the rc 2.5 lift springs
|
|
|
Post by C Monster on Mar 16, 2013 17:14:43 GMT -4
I build a new bumper I wanted one that was not so much weight and looked a little cleaner not so much crazy rock buggy looking and now working on the upper rear coil spring brackets will post photo of them asap and next jk lights and fender mods
|
|
|
Post by SocialWheeler on Mar 16, 2013 18:10:02 GMT -4
Looks good man.
|
|
|
Post by 97cherokee on Mar 17, 2013 6:53:34 GMT -4
What is that lift you are using ?
|
|
|
Post by C Monster on Mar 17, 2013 9:35:08 GMT -4
What is that lift you are using ? it's a mid lift hoist made by rotary I love it I use it 6 times a week and had 100's or cars and suv and small trucks on it
|
|
|
Post by 97cherokee on Mar 17, 2013 21:44:20 GMT -4
Where did it come from and what's a price tag on em sweet set up
|
|
|
Post by C Monster on Mar 18, 2013 8:00:12 GMT -4
|
|
|
Post by C Monster on Mar 18, 2013 8:08:07 GMT -4
|
|
badwithcomputer
Jeeper
You have DC2's? You just made a new best friend.
Posts: 2,863
|
Post by badwithcomputer on Mar 18, 2013 13:18:20 GMT -4
BEEEEFF!!!! I wouldn't even put a coil in there!
|
|