Reply

Chev leafs with good flex, any ideas/suggestions?

« Prev
1
Next »

skippy446 Jeeper Posts: 75	Chev leafs with good flex, any ideas/suggestions? Dec 30, 2012 17:10:45 GMT -4 Quote Select Post Deselect Post Link to Post Back to Top Post by skippy446 on Dec 30, 2012 17:10:45 GMT -4 Anyone have any good ideas to make chev 1/2ton leafs nice and soft for good flex? Without spending a fortune
	90' Toyota 3.4L V6 5-spd, 4.10 gears, Rear E-Locker, 4" Trailmaster Lift, 2.5" body, 35" BF Krawlers mounted on 15x10 Mickey Thompson Classic II's, custom front bumper w/reciever mounted 10,000lb winch, 6 100watt lights, Custom SAS swap

dan Jeeper Membership Co-ord - Valley Posts: 3,397	Chev leafs with good flex, any ideas/suggestions? Dec 30, 2012 19:11:14 GMT -4 Quote Select Post Deselect Post Link to Post Back to Top Post by dan on Dec 30, 2012 19:11:14 GMT -4 pull out a leaf or two?
	'95 YJ. waggy d44's, custom stretched 3-link front with an astro steering box, rear stretched with SOA XJ springs, and 35" Mickey Thompson MTZ's. front lock-right and fozzied rear. RCV's. 4.0 swapped in with 1" "MML", 1" rewelded body mount lift, boat-sides, flat belly, gas tank tucked up 5". '95 Grand Cherokee V8 Orvis edition. '98 D44a rear, 2x4 rockers. rollin' on 235's. full of junk.

Cherokee Chief Jeeper Posts: 1,532	Chev leafs with good flex, any ideas/suggestions? Dec 30, 2012 19:49:18 GMT -4 Quote Select Post Deselect Post Link to Post Back to Top Post by Cherokee Chief on Dec 30, 2012 19:49:18 GMT -4 Replace them with thinner leafs, but a couple more than origional.
	2000 TJ lifted on 35's locked front and rear

BenConrad Jeeper Posts: 213	Chev leafs with good flex, any ideas/suggestions? Dec 30, 2012 20:09:30 GMT -4 Quote Select Post Deselect Post Link to Post Back to Top Post by BenConrad on Dec 30, 2012 20:09:30 GMT -4 Which chev springs? 46, 48, 52, 56, or 64 inch? Factory or aftermarket lifted? In your yota I assume?

skippy446 Jeeper Posts: 75	Chev leafs with good flex, any ideas/suggestions? Dec 30, 2012 20:18:32 GMT -4 Quote Select Post Deselect Post Link to Post Back to Top Post by skippy446 on Dec 30, 2012 20:18:32 GMT -4 I'm building a rig with a Toyota frame, cab and chev motor and drivetrain. Not sure what the length is between the hangers, haven't measured them yet
	90' Toyota 3.4L V6 5-spd, 4.10 gears, Rear E-Locker, 4" Trailmaster Lift, 2.5" body, 35" BF Krawlers mounted on 15x10 Mickey Thompson Classic II's, custom front bumper w/reciever mounted 10,000lb winch, 6 100watt lights, Custom SAS swap

90bronco Jeeper just smitin' Posts: 3,415	Chev leafs with good flex, any ideas/suggestions? Dec 31, 2012 18:59:42 GMT -4 Quote Select Post Deselect Post Link to Post Back to Top Post by 90bronco on Dec 31, 2012 18:59:42 GMT -4 54" and move your hangers to fit
	Allen 90 fullsize bronco 351efi 6" drop bracket skyjacker lift with add a leaf ,hydro 7000 shocks ,35" Maxxis tires,9000lb tabor winch,on board air just an old truck with a lift ! maritimeoffroad.proboards.com/index.cgi

geezer Jeeper Posts: 399	Chev leafs with good flex, any ideas/suggestions? Jan 1, 2013 9:57:58 GMT -4 Quote Select Post Deselect Post Link to Post Back to Top Post by geezer on Jan 1, 2013 9:57:58 GMT -4 88ish chev 64" and move the hangers up to the back of the cab as possible.The longer,thin leaves will give you alot of flex and the're easy to get.