|
Post by DamnJeep on Feb 5, 2013 12:41:05 GMT -4
Whaty kind of shifters are people running?
I was looking at a B&M ratchet shifter but have no experience on what would be the better choice off-road.
I want to have the ability to quickly shift from drive to reverse without having to worry about little lockouts and such.
|
|
justajeep
Moderator
Valley - VP
Bear River, NS
Posts: 7,214
|
Post by justajeep on Feb 5, 2013 12:54:15 GMT -4
Don't get a ratchet shifter then!
|
|
|
Post by C Monster on Feb 5, 2013 13:24:13 GMT -4
i have a b and m ratchet shifter in my truck but it does have the reverse lockout but there must be a mod, you can do to it to remove the lockout it's a great shifter
|
|
|
Post by geezer on Feb 5, 2013 14:30:03 GMT -4
Look at Rue's and Everett's.They work really good.I ordered Everett's and I can't remember what kind it is .I'm old.lol
|
|
'Roach
Elite
InsurJeeper
...the man who decided to use torx on Jeeps should be beaten severely...
Posts: 1,002,222
|
Post by 'Roach on Feb 5, 2013 15:01:30 GMT -4
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Feb 5, 2013 18:18:19 GMT -4
I'll get you the spec's on my B&M. Handle lifts with smooth action to get reverse and park. no trigger or finger lock. Didn't run it yet, but it feels nice sitting in the cab. lol
|
|
|
Post by 540rock on Feb 5, 2013 18:38:19 GMT -4
i have a b&m ratchet shifter in the jeep. i hated it at first but after i took out the reverse lock out lever i like it and can now go to rev quickly with one hand. i got a pro bandit for the new buggy and it will be loosing the rev lock out before it ever goes in.
|
|
Highsider
Jeeper
If I only had the time
Posts: 357
|
Post by Highsider on Feb 5, 2013 23:52:02 GMT -4
i have a b&m ratchet shifter in the jeep. i hated it at first but after i took out the reverse lock out lever i like it and can now go to rev quickly with one hand. i got a pro bandit for the new buggy and it will be loosing the rev lock out before it ever goes in. Build thread on new buggy?
|
|
|
Post by 540rock on Feb 6, 2013 6:41:17 GMT -4
i have a b&m ratchet shifter in the jeep. i hated it at first but after i took out the reverse lock out lever i like it and can now go to rev quickly with one hand. i got a pro bandit for the new buggy and it will be loosing the rev lock out before it ever goes in. Build thread on new buggy? I can't post pics on here so what's the point. I tried to post pics twice. It's just some old junk I had laying around I'm putting together to beat on the rocks. I don't make things fancy like some other people.
|
|
|
Post by DamnJeep on Feb 6, 2013 21:02:14 GMT -4
Build thread on new buggy? I don't make things fancy like some other people. I heard that! Although I appreciate and like all the cool work seen here or other boards when I smash my buggy I bet it hurts a lot less than the pretty ones! ;D ;D ;D Which B&M shifter?
|
|
|
Post by 540rock on Feb 7, 2013 7:36:05 GMT -4
Which B&M shifter?
[/quote]
I got a B&M pro sick in the jeep and a B&M pro bandit in the buggy. both are vertical gates with the spring lever.
|
|
rue
Jeeper
Buggy!
DARE YA
Posts: 2,022
|
Post by rue on Feb 7, 2013 16:44:29 GMT -4
I run a pro stick,I was planning on modifying the gates but haven't bothered yet.Once u get the feel for it,u can to rev. pretty quick.U do have to modify the rev. lock out.
|
|
Stevens
Jeeper
2008 Mud Pit Master
Posts: 3,240
|
Post by Stevens on Feb 7, 2013 21:17:50 GMT -4
Lokar
|
|