dan
Jeeper
Membership Co-ord - Valley
Posts: 3,397
|
Post by dan on Mar 3, 2014 18:07:53 GMT -4
very nice. how do you get him to do work for you Alan? I can't get him to the house for more than 10 minutes.....
|
|
justajeep
Moderator
Valley - VP
Bear River, NS
Posts: 7,214
|
Post by justajeep on Mar 3, 2014 21:34:08 GMT -4
It's been over 2 years since he did this for me. How? I machine custom Jeep parts.
|
|
justajeep
Moderator
Valley - VP
Bear River, NS
Posts: 7,214
|
Post by justajeep on Mar 13, 2014 12:12:17 GMT -4
Dad's fixing the bunk roof on a friend's Pete. Didn't think we could fit one in the 12' door, but with the stacks off and the air dumped out of the bags, it fit! Long truck, to have room to walk in front, rear wheels are in the old shop a bit. This truck has close to 2,000,000 km on it!
|
|
jptj
Jeeper
Trail Master - Valley
Posts: 879
|
Post by jptj on Mar 14, 2014 12:46:54 GMT -4
Tight fit! Stan's truck? It's done some cruzin'...
|
|
justajeep
Moderator
Valley - VP
Bear River, NS
Posts: 7,214
|
Post by justajeep on Apr 6, 2014 17:25:12 GMT -4
Finally got the in floor heat plumbed up, got water flowing it in now. Zone valves, mixing valve, pipes into the floor. Still have some work to do to make it all tidy. Plumbing coming out of the furnace. I didn't take pics, but there are 2 cast iron rads near the back of the old shop. This is where the heat comes from. Steel pipe rads with 4" square fins sitting on top of the fire box acting as heat exchanger. Had people tell me it wouldn't work, but it works great. There are 3 of them in there about 20" long each. Got it going late yesterday afternoon, but didn't get all the air worked out until this afternoon. Should have a warm floor tomorrow!
|
|