|
Post by TomWood on Jun 24, 2013 11:47:38 GMT -4
PM Sent, Looks like a bit of work needed to the front of that. The wheel spacers will give the libby a nice stance, start looking mean.
|
|
|
Post by crazyfrog on Jun 24, 2013 20:55:13 GMT -4
Pick up my tires tonight 265/75/16 KM2, He also had AT KO in the truck, side by side for the same size the KM2 are 1" narrower than the AT I think that will work out well.
|
|
|
Post by backwoodsLJ on Jul 7, 2013 10:59:27 GMT -4
Pick up my tires tonight 265/75/16 KM2, He also had AT KO in the truck, side by side for the same size the KM2 are 1" narrower than the AT I think that will work out well. Progress??
|
|
eastcoastcam
Jeeper
Is it time to go wheeling yet??
Posts: 1,690
|
Post by eastcoastcam on Jul 7, 2013 13:03:36 GMT -4
Pick up my tires tonight 265/75/16 KM2, He also had AT KO in the truck, side by side for the same size the KM2 are 1" narrower than the AT I think that will work out well. A narrower tire will definately not be a bad thing. Tom, you should post the pick of the gray Libby with the bumper chopped for Luc to see. He will like that. Makes it even more Jeep looking !
|
|
|
Post by TomWood on Jul 8, 2013 7:50:56 GMT -4
This is the mod I will be doing to mine shortly.
|
|
|
Post by crazyfrog on Jul 9, 2013 22:35:32 GMT -4
I am still waiting for my lift and spacer, I did an oil change, top up all fluid, got a set of molded floor mat, a new cobra CB, and replace the HVAC resistor control, one of the guys at work got a code reader for is birthday so Tomorrow I am replacing an O2 sensor. That bumper looks awesome on that silver libby
|
|
|
Post by crazyfrog on Jul 10, 2013 21:01:57 GMT -4
Today replace O2 sensor, inspected the brakes it needs new pads all around and a lower ball joint on the driver side, this will be done Saturday.
|
|
|
Post by TomWood on Jul 12, 2013 15:06:24 GMT -4
Sounds like your getting there! Mine kind of kicked the bucket right now (Head gasket we think) so its not going anywhere. When do you think the lift will be in?
|
|
|
Post by crazyfrog on Jul 12, 2013 17:43:50 GMT -4
I hope for next Friday, I also need to move the tow hooks and skid plate from the 07.
|
|
|
Post by TomWood on Jul 15, 2013 11:42:46 GMT -4
|
|
|
Post by theonlybull on Jul 19, 2013 10:48:09 GMT -4
what kind of mileage are you guys getting from the libby's. figure i'm gonna need a replacement for the tracker, thought if i could get a jeep of somesort, then all the kids can go wheeling. just don't wanna stray tooo far from something with decient mileage.. you guys moding these libby's are starting to make me like them lol
|
|
littlemulticoloredwagoneer
Moderator
Trail Master/Jam Co-chair - Valley
Buy it, Build it, Break it!!...........REPETE!
Posts: 2,310
|
Post by littlemulticoloredwagoneer on Jul 19, 2013 11:33:03 GMT -4
Go with An XJ bill it will never steer you wrong.
|
|
|
Post by TomWood on Jul 19, 2013 13:19:59 GMT -4
XJ has the better front everything for wheeling, Liberty is better on the road in terms of comfort. I can get anywhere in mine that I want to go with the 2.5" lift and 32's, definitely need to trim for 32's. I was getting anywhere from 11L/100km (No mods highway driving 100) to 18L/100km in the city, all depends how you drive but they aren't the best on gas.
|
|
|
Post by crazyfrog on Jul 19, 2013 16:13:28 GMT -4
It is far better than my TJ was, I removed the tow hook and skid plate from the 07 today painted them to be installed tomorrow I will be doing the brakes also, still no lift. Tom do you have a 35mm axle socket by chance I could not find one today.
|
|
|
Post by TomWood on Jul 22, 2013 12:22:01 GMT -4
I do not, I use the Autoclub for anything like that. I am glad to hear its better than the TJ, they are good capable rigs with much potential.
|
|