|
Post by Cherokee Chief on May 4, 2014 18:07:54 GMT -4
Hopefully someone can answer me this" Are all orbital valve hoses connections at the same spot. Example holding the orbit valve with the splines at the top. Bottom left = Pressure Bottom right = Ram Top left = Return Top right = Ram
That's what I found on the internet, but you cant always believe the net
|
|
rue
Jeeper
Buggy!
DARE YA
Posts: 2,022
|
Post by rue on May 4, 2014 19:51:31 GMT -4
There should be some markings on the casting. Should be a P for pressure,T for tank/return. On my trail gear orbital, the P and T are not the left side if it's sittin on the bench with column end up.
|
|
dan
Jeeper
Membership Co-ord - Valley
Posts: 3,397
|
Post by dan on May 5, 2014 2:49:49 GMT -4
yup. Pressure and Tank, then hook the other two up. ya got a 50/50 chance of getting it right the first try.
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on May 5, 2014 11:11:03 GMT -4
yup. Pressure and Tank, then hook the other two up. ya got a 50/50 chance of getting it right the first try. This. Should be P and T on there somewhere.
|
|
|
Post by Cherokee Chief on May 5, 2014 12:28:20 GMT -4
I didn't see any markings but I will recheck. cool thanks guys
|
|