CML
Jeeper
Posts: 52
|
Post by CML on Oct 8, 2014 20:31:37 GMT -4
Hey.. I want to bed liner by hard top.. has anyone done this? any tips tricks?
|
|
eastcoastcam
Jeeper
Is it time to go wheeling yet??
Posts: 1,690
|
Post by eastcoastcam on Oct 8, 2014 21:43:12 GMT -4
That is how mine is done, after I made a couple repairs. It still looks the same as when I did it 2 years ago. Took 5 spray bomb cans (used 4 1/2) and got a nice textured finish on it. Stop by for coffee night sometime if you want to see it. The Back Country 4x4 Club will be at the Tim Horton's in Bedford by Canadian Tire tomorrow evening at 7:00ish. I will be there if you want to drop out, or any Wednesday the NSJC crew is there too.
|
|
skinypedalmasher
Jeeper
Secretary - North Nova
YJ..stock axles 35"Pitbull Rockers..305H.O motor...700R4..What will break first?
Posts: 1,164
|
Post by skinypedalmasher on Oct 9, 2014 8:14:05 GMT -4
Just did mine...turned out great...i will try it out this week-end. My old heep,i just sanded it with a orbital air sander...wiped it down with a solvent to remove the dirt and dust..and sprayed away...The over spray that i did get on the glass...came right off with a razor blade..
|
|
|
Post by C Monster on Oct 9, 2014 8:43:09 GMT -4
it's all about paint preparation and don't cheap out and DON"T use that Dupli-Color bed armor junk use the Canadian made stuff
|
|
riles19
Jeeper
There is a fine line between bravery and stupidity.
Posts: 160
|
Post by riles19 on Oct 9, 2014 9:22:33 GMT -4
it's all about paint preparation and don't cheap out and use that Dupli-Color bed armor junk use the Canadian made stuff x2. I had a '98 GMC 2500 and I did the entire truck. I used the dupli-color in the bed itself, did 2 coats, and it didn't take much to scratch/peel it up. I sprayed the entire body and frame with the good stuff,1 coat, and you could pretty much take your keys to it and not hurt it. It seen 5 years of service hauling hardwood/scrap metal/rock, you name it. The dupli-color in the bed pretty much wore completely off, but the body held up nicely, even in spots that got dented.
|
|
|
Post by C Monster on Oct 9, 2014 9:27:55 GMT -4
it's all about paint preparation and don't cheap out and use that Dupli-Color bed armor junk use the Canadian made stuff x2. I had a '98 GMC 2500 and I did the entire truck. I used the dupli-color in the bed itself, did 2 coats, and it didn't take much to scratch/peel it up. I sprayed the entire body and frame with the good stuff,1 coat, and you could pretty much take your keys to it and not hurt it. It seen 5 years of service hauling hardwood/scrap metal/rock, you name it. The dupli-color in the bed pretty much wore completely off, but the body held up nicely, even in spots that got dented. yes yes I meant to say DO NOT USE that bed armor stuff it's junk only use that Canada made stuff EZ liner
|
|
CML
Jeeper
Posts: 52
|
Post by CML on Oct 9, 2014 10:22:19 GMT -4
Yah I used that stuff and did the entire floor of my jeep and I noticed it's already peeling just from sliding my spare in and out and the jack
|
|
|
Post by jolv on Oct 9, 2014 13:26:16 GMT -4
Mine is going on the jeep this weekend - washed, sanded, rinsed and dried thoroughly before painting. Hoping the EZ liner holds up. I used 7 cans of EZ liner for the JKU roof, but could probably have used less.
|
|
CML
Jeeper
Posts: 52
|
Post by CML on Oct 13, 2014 14:35:53 GMT -4
So is it the E Z Liner that everyone recommends? I think I'm going to tackle that project this week..
|
|
|
Post by andrew7447 on Oct 13, 2014 17:36:10 GMT -4
Used ez liner after I hit my roof off of the hali under ground mall parking
|
|