here's a few pics of the newest project in the shop.i was looking to have a trailer that would work good, be multi-functional and yes look cool behind the jeep.went with a military vibe.started with 2x2x3/16 square tubing. made the frame 4'x6'. i already had a piece of 3/16 steel 4'x6' that i used for the floor. picked up a sheet of 1/8 steel 5'x10' to cut up for the remainder of the box, went with the odd size of steel due so i would have very little waste or left over material heres the first pic's i took,box is sitting on the frame with a 2000lb princess auto axle fitted up under it for the time being
added 3 d-rings down each side and 2 at the front.fenders are from princess auto.framed the bottom of the box with 1x2x1/8 rectangle stock.also added 1x1x1/8 square stock around the top of the box.rattle canned the box flat green.