|
Post by kendra11wrangler on May 27, 2015 11:51:52 GMT -4
With only 22 days left until Jam I can't get over how quiet it is in here!
Who has what left to do to their Jeeps?!
I still have change the oil in my rear diff and check the other fluids. But the back seat is out and ready for packing!
|
|
|
Post by 8 inches longer, again on May 27, 2015 12:38:10 GMT -4
Jeep 1: - Change coilovers from 14" travel Fox to 16" Profenders - Change case over to Atlas (if all parts arrive in time) - Install Corbeau front seats (if seat bases arrive in time) - Try to find a new diff cover for rear diff
Jeep 2: - Install Skyjacker quick disconnects on front swaybar - Change gear oil in front diff
|
|
|
Post by donsjeep on May 27, 2015 15:43:47 GMT -4
Mine needs at least one front wheel bearing.
Sent from my SGH-I747M using proboards
|
|
Muddin Mar
Moderator
Jam Co-Chair
featuring Black Betty (aka Mini Beast)
Posts: 913
|
Post by Muddin Mar on May 28, 2015 20:30:48 GMT -4
Lol and us Jam planners are busy as well! I have a few things left to do, nothing major now though thanks to Mike!
|
|
|
Post by junderflunder on May 29, 2015 8:26:51 GMT -4
Cant wait this is my first year comming out. I still have to put gears in, leaf spings and powersteering pump. Gonna be a busy couple of days!!!
|
|
|
Post by thumper on May 29, 2015 11:09:05 GMT -4
Still need to get my axles in, route my air lines for lockers as well as the onboard compressor and a-pillar switches
|
|
BenGosse
Jeeper
Trail Master 2 - Halifax
Posts: 126
|
Post by BenGosse on May 30, 2015 19:51:44 GMT -4
Just changed my ABS sensor, installed rock rails, am waiting on new springs and shocks from CVO...
|
|
skot
Jeeper
" It's not easy being GrEeN "
Posts: 71
|
Post by skot on May 31, 2015 13:12:52 GMT -4
Have an Xj on stands with just a drivers seat and block. so far all motor parts have come and just got done welding the plate to the under side front to rear. Cam/lifters tonight and the 505 head in the am. I have a Dana 30 lockright but don't know if I will use it or sell it. CAN NOT FIND FORD INJECTORS IF ANY OF YOU KNOW OF ANY #24 24 LBS..... and tires.. I cannot get tires. I have tickets and NO 33...35...37. in 15's so the hunt is on! 18 days.. you can build a jeep from the ground up with a 3/4 done motor ?? right?
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on May 31, 2015 14:32:31 GMT -4
What do you want for tires ? I have 34 ss tsl,s and 33 bfg at's
|
|
Muddin Mar
Moderator
Jam Co-Chair
featuring Black Betty (aka Mini Beast)
Posts: 913
|
Post by Muddin Mar on Jun 1, 2015 20:07:56 GMT -4
Good luck!!!
|
|
grumpy66
Jeeper
Can't sing, can't dance, too fat to fly!
Posts: 230
|
Post by grumpy66 on Jun 2, 2015 5:59:16 GMT -4
Front and rear axle truss, rear bumper with tire carrier, ebrake, wheel speed sensor, figure out why my vacuum pump won't turn on, mount spare tire, mount new to me 8274.
|
|
|
Post by ©Big6™ on Jun 2, 2015 8:28:41 GMT -4
Suppose I should get going on my list....
Finish welding the holes on the ZJ, see what else it needs for safety, put a battery in the old girl and some street time to iron out the winter storage creeks!
|
|
|
Post by donsjeep on Jun 2, 2015 9:31:29 GMT -4
hopefully getting both front wheel bearings replaced today and waiting on parts for my winch
|
|
|
Post by donsjeep on Jun 2, 2015 18:08:52 GMT -4
Wheel bearing done..
Sent from my SGH-I747M using proboards
|
|
tchase
Jeeper
Steering Committee - Valley
Posts: 489
|
Post by tchase on Jun 3, 2015 11:46:28 GMT -4
I cannot get tires. I have tickets and NO 33...35...37. in 15's so the hunt is on! we've got 33x12.50 km2's in stock and just got one set of 35's in yesterday afternoon.
|
|