marf
Jeeper
Posts: 90
|
Post by marf on Feb 6, 2016 23:18:57 GMT -4
Got a good one for you tech savy guys. I recently replaced my rear windshield washer motor/assembly. Everything was fine...motor worked, washer worked as expected and my leak was fixed.
Today, my rear window was filthy....so I jogged the sprayer a few times squirting some washer fluid on the window when all of a sudden, it stopped spraying on the rear window and started spraying the front. (not with quite as much force...but still spraying the front quite well. I double checked....yes, I'm using the rear control. The front washer and wiper work as intended, the rear wiper works but ...the rear sprayer now sprays the front windshield.
I'm perplexed....any ideas whats going on?
|
|
|
Post by lilmonster on Feb 7, 2016 9:44:03 GMT -4
Plugged nozzle
|
|
marf
Jeeper
Posts: 90
|
Post by marf on Feb 9, 2016 20:33:06 GMT -4
I would of suspected a plugged nozzle too, except for it stopped working before my very eyes. It was spraying strong out back and changed to the front. I'm wondering if it might be a check valve or something. I'm gonna have to wait for a warm day and take some shit apart.
|
|
marf
Jeeper
Posts: 90
|
Post by marf on Feb 11, 2016 22:09:50 GMT -4
Traced it to a hose came off up front. Weird that a hose falling off causes it to change to the front.
|
|