|
Post by frankenjeep on Apr 26, 2016 22:07:43 GMT -4
Hey all, I'm thinking of adding the two short pieces from the rollbar to the windshield on my 85 CJ7. After repairing the nut holes in the (fibreglass) windshield frame the windshield doesn't lay back far enough to seal the door frames. Do the YJ ones bolt right up or am I gonna have to "tweak" it a bit? ...or do I have to replace the works? What years YJ? I can't use the "family style" because of the slope of my soft top Anybody got some good info / pics? AND... looking for a couple small things preferably from a CJ but thinking YJ will fit: - Firstly, those two rollbar pieces to the windshield and a Windshield washer tank / pump (I bought a used TJ one and it's too big & plug is weird)
Oh, and I need the CJ windshield squirters.
Any help appreciated thanks Pat
|
|
|
Post by 76jeep on Apr 28, 2016 17:12:09 GMT -4
I have yj ones on my cj7 and to put the full doors and hard top on I have to remove them. I think I have a squirters here. cj7 did not have those bars.
|
|
|
Post by frankenjeep on Apr 28, 2016 18:43:19 GMT -4
Hey Blair, Thanks for that-I may have to fabricate or modify something. (Has Anyone done that?) I would appreciate it if you could check on the washer squirty things for me.
|
|
|
Post by 76jeep on May 1, 2016 15:51:50 GMT -4
still looking
|
|