|
Post by Nightpath on May 3, 2017 19:58:49 GMT -4
Bought a replacement D35 on the cheap with mostly new parts in it. Was taking the brakes apart when I noticed it had ABS. I removed the sensors since they were toast and started to clean things up. I have some of the hardware in my collection (new) to put on, but I noticed that the wheel cylinders had different part numbers for ABS and non-ABS.
Since I'm not using the ABS I take it I should be replacing them with the non-ABS wheel cylinders. Is there anything else I should be aware of when removing the ABS components?
|
|
|
Post by frankenjeep on May 10, 2017 20:00:10 GMT -4
You may have safety inspection issues- If your jeep came with ABS you can't just take it out. I ran into that with mine- Dash cluster said I had it even though I didn't
|
|