|
Post by greg09wr on May 28, 2014 23:29:47 GMT -4
Replaced it and then tried unplugging it for a while after that didn't work either.
|
|
|
Post by greg09wr on May 28, 2014 22:05:24 GMT -4
Sorry Jan it does come on then turn off when I put the key to the on position. It's got a black key, I did switch around the relays, checked all the fuses, I'll have to double check the ground at the back of the motor, it does have auto start and I'll have to look for an old alarm system. Can only get so much tinkering done a day working nights on a shut at a nuke plant lol
|
|
|
Post by greg09wr on May 28, 2014 21:28:05 GMT -4
No check engine light on, the fuel light comes on and then turns off like normal. the oil pressure gauge goes from the rest position up to 0 but the fuel and volt gauge don't move.
|
|
|
Post by greg09wr on May 28, 2014 20:43:50 GMT -4
There was no power going to the coil so my next thing idea was to check the cam sensor then if they doesn't work the computer maybe? The volt gauge isn't showing anything and neither is the fuel gauge when the key is in the on position if that means anything too?
|
|
|
Post by greg09wr on May 28, 2014 17:00:49 GMT -4
So I got a good deal on a 98 Cherokee and not being able to pass up a good deal on a jeep I bought it. 98 Cherokee 4l auto. I bought it not running and determined after I got it home the fuel pump was bad. So I replaced that had pressure at the rail but then it stopped. I'm not getting any fire either. No power to the coil. I checked all the fuses and swapped some relays around and even changed out the cps but still nothing, any ideas? Thanks fellas
-Greg
|
|
|
Post by greg09wr on Feb 20, 2014 17:41:05 GMT -4
What about the j truck in "Tremors"
|
|
|
Post by greg09wr on Feb 19, 2014 21:31:00 GMT -4
Just a little place outside St. John. I'll see if he still has the old thing still this weekend
|
|
|
Post by greg09wr on Feb 18, 2014 21:53:33 GMT -4
Fella i know used to run them out here in NB. I can ask if he still has one, he had this one for sale a few years ago but kept it, ill see if he still wants to get rid of it. oops, my bad, seen ya found a Taco.
|
|
|
Post by greg09wr on Jun 11, 2013 20:04:44 GMT -4
Yup, Greg Backman is the one with the white rubi.
|
|
|
Post by greg09wr on Jun 10, 2013 9:33:15 GMT -4
Lost my front plate on crusher... Finally made it over the first rock obstacle without breaking something. Only took 3 years to do lol then dented my rockers on crusher and then the other side on ghost train. Nice thing about 1/8 plate is you can bend it back out pretty quick with an adjustable wrench.
|
|
|
Post by greg09wr on May 13, 2013 10:26:45 GMT -4
Lol my bad. Just wanted to make sure they were REALLY black Len
|
|
|
Post by greg09wr on May 12, 2013 20:44:14 GMT -4
What are you looking to get for the jk rims? Black?
|
|
|
Post by greg09wr on Feb 11, 2013 17:06:22 GMT -4
dont tell me that! the cj could use a new set of tires pretty bad...
|
|
|
Post by greg09wr on Feb 5, 2013 22:30:48 GMT -4
I run a 44 scout front and rear on my cj with a 350 sbc and am running 38 tsl swampers and have had no issues besides having to upgrade my steering but as far as breaking axles goes, haven't snapped a stock axle yet.
|
|
|
Post by greg09wr on Sept 3, 2012 20:48:13 GMT -4
Very nice Ted!
|
|