chevystroker
Jeeper
NEVER CONFUSE HAVING A CAREER WITH HAVING A LIFE ! ! ! ! ! !
Posts: 896
|
Post by chevystroker on Nov 28, 2006 22:50:56 GMT -4
Need an 87 xj engine wiring harness for a 4.0 litre 5 spd. I need the part that goes from the computer, through the firewall, and over to the right side of the engine. I think the harness is the same or close enough that an auto one will work. I have one for a 90, and it is different.
Also looking for 2x4 or 2x5 steel tubing to do the rockers on same vehicle. I don't mind if they are shorter pieces and I have to weld them together.
Thanks, Wayne.
|
|
Shiny
Jeeper
Growing old is Inevitable, Growing up is Optional !
Posts: 1,331
|
Post by Shiny on Nov 29, 2006 6:32:47 GMT -4
cant help you on the harness but i got my rocker material at 'metals r us'.
8' of 3/16th 2x4 tubing for under $60. for the price of disks to clean up used ones to get them ready to paint, you might as well buy new.
|
|
chevystroker
Jeeper
NEVER CONFUSE HAVING A CAREER WITH HAVING A LIFE ! ! ! ! ! !
Posts: 896
|
Post by chevystroker on Nov 29, 2006 7:44:49 GMT -4
Yeah, $60 isn't bad. Replacement rockers are $40 EACH at NAPA, and they will just rust out again. There is a thread on here about all of the metal shops but haven't found it, YET. Thanks.
|
|
|
|
Post by xjunk on Nov 29, 2006 9:36:25 GMT -4
got a 87 in my yard it a auto call me randy 876 0051/405 4099.
|
|
|
|
Post by Mickey on Nov 29, 2006 22:28:27 GMT -4
I have a complete harness that was fitted on my 92 XJ, 4 ltr fuel injected, manual transmission.
Every piece of wires that was fitted have been removed call me
Mickey, 865-5004 Beaver Bank
|
|
chevystroker
Jeeper
NEVER CONFUSE HAVING A CAREER WITH HAVING A LIFE ! ! ! ! ! !
Posts: 896
|
Post by chevystroker on Dec 3, 2006 17:25:46 GMT -4
Hey Mickey.
I found out that 90 and down harnesses will work, they just look a little different, and don't have the junction block on the firewall. 91 and up will NOT work as they are HO engines. Totally different.
Thanks, Wayne.
|
|
