The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Mar 27, 2009 22:32:34 GMT -4
We put a body lift , MML , tummy tuck in James's Rubi today Here are just a few pics Skid is made from 1/4 plate with angle welded on the inside , ( between pass and driverside ) between the trannie and the T case for support Little bolt skid for the trannie bolts Gained some where around 2-2.5 inches in clearance over the old factory skid To busy to take allot of pics today , we finished up at 10 pm tonight . Ray is going to flash some paint on the skid tomorrow morning , then it will be done
|
|
jamesc
Jeeper
If you can't fix it with a hammer, you have an electrical problem
Posts: 1,917
|
Post by jamesc on Mar 27, 2009 22:44:20 GMT -4
;D
James
|
|
|
Post by projectnightmare on Mar 27, 2009 23:34:30 GMT -4
Excellent.
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Mar 27, 2009 23:36:52 GMT -4
Yours is next , comes with FREE SHOCK INSTALL lol ;D
|
|
|
Post by projectnightmare on Mar 27, 2009 23:39:38 GMT -4
I know. That's just what I want. nice upgrade James.
sorry about the shocks.
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Mar 27, 2009 23:51:06 GMT -4
hahaha I am just joking , it wasn't that bad
|
|
luvmyjeep
Jeeper
Work sucks...I'm goin' Jeepin'!!!
Posts: 1,211
|
Post by luvmyjeep on Mar 27, 2009 23:54:44 GMT -4
Nice work Scott! The Jeep looks great James!
|
|
mrg
Jeeper
Steering Committee - Halifax
Posts: 2,705
|
Post by mrg on Mar 28, 2009 7:07:17 GMT -4
What do those skids run? Does it raise the driveline 2 1/2inches or just flatten the skid? ;D Jeep looks great.
|
|
shadow
Hardcore
Age and Experience will trump Youth and Exuberance anyday...;)
Posts: 6,997
|
Post by shadow on Mar 28, 2009 13:16:10 GMT -4
Right on
|
|
J*E*E*P
Jeeper
NorthNova
Posts: 3,084
|
Post by J*E*E*P on Mar 28, 2009 13:32:28 GMT -4
What do those skids run? Does it raise the driveline 2 1/2inches or just flatten the skid? ;D Jeep looks great. X2 Got my attention. I'm interested in more info on the TT. If You Can Do That?
|
|
jamesc
Jeeper
If you can't fix it with a hammer, you have an electrical problem
Posts: 1,917
|
Post by jamesc on Mar 28, 2009 14:04:26 GMT -4
Just got it back here to the house. The belly pan looks even better in person. It's beefy, and slides over stuff now The belly pan tucks the driveline up with the BL and MML, but I had it up to around 130 and there are no major vibes from the driveline (a little harmonic vibration around 120 or so that comes and goes, but nothing major). The MML is just two spacers that Scottie made up. Overall I'm really pleased with how it looks, it has some extra room in the wheel wells now (but I need some disconnects to stuff the front tires now ). If anyone is going to be in the area and is interested in checking it out, shoot me a message. Now I just gotta get wheelin and put it to the test ;D James
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Mar 28, 2009 15:31:12 GMT -4
What was done to James Rubi was as follows 1.25 in body lift 1 in motor mount lift Custom made cross member / skid , that raises the pan 2-2.5 inches I have a templete now made of James's crossmember , so when ever anyone comes into get this done , it can now be pre made , and installed in a normal day . Or if you want to do this yourself , kits could be ready , complete with all you need All inquires should be directed to CVO @ 468-5082 I am only going to be working there for 1-2 more weeks , so if anyone wants me to do these , they should do it soon ( not that anyone else couldn't do it from CVO ) Shameless advertising done
|
|
mrg
Jeeper
Steering Committee - Halifax
Posts: 2,705
|
Post by mrg on Mar 28, 2009 16:06:30 GMT -4
Well I alllready have a 1" MML and 1.25" BL but I think I need a flat skid. ;D
|
|
|
Post by johnboy on Mar 28, 2009 16:13:34 GMT -4
"Stupid question": Whats the purpose of the MML?
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Mar 28, 2009 16:16:34 GMT -4
The mml adds room for the trannie to move up , as well as keeping the trannie in a stockish angle
|
|