Old Yeller
Jeeper
Its... sitting next to my garage. Poor girl.
Posts: 2,890
|
Post by Old Yeller on Feb 23, 2010 7:11:24 GMT -4
What year did the dana30 switch over to the unit bearing? I swear I remember pressing out the bearings in my 90YJ, but my memory could be foggy. I have 92 axles under it now.
Both wheel bearings are shot and if its the type with just the bearings, it would sure be cheaper.
Rob D
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Feb 23, 2010 11:39:37 GMT -4
After CJ's. all unitbearings can be pressed out, its just that it sucks. maybe you cheaped out and forgot about it, and pressed them to save a buck.
|
|
Old Yeller
Jeeper
Its... sitting next to my garage. Poor girl.
Posts: 2,890
|
Post by Old Yeller on Feb 23, 2010 12:22:11 GMT -4
It it wasn't readily apparent that it was possible, I doubt I did it. I know my old ford escort was like that.
Good enough, I guess I know what I need to buy.
Rob D
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Feb 23, 2010 12:35:36 GMT -4
I've never seen a unitbearing D30 that NEEDED to have pressed bearings. You just replace the whole thing. but obviously there are bearings in there, that can be pressed out. they didn't forge/cast the knuckle around the bearing!
|
|
justajeep
Moderator
Valley - VP
Bear River, NS
Posts: 7,214
|
Post by justajeep on Feb 23, 2010 13:09:06 GMT -4
91 and newer unit bearings are different than older ones (because of brakes). The newer ones you can't replace the bearings, race is built into it. For what you can get hubs for now, it's not worth getting the bearings and seals for the older ones, and then having to do the work of changing them too.
The unit bearings started in the 84 XJ.
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Feb 23, 2010 14:13:07 GMT -4
ah, machined races in the newer ones. that would certainly make a difference. thx!
|
|
Sandboxcowboy
Jeeper
Oh yes, please tell me how deep that mud puddle was in beaver bank.....
Posts: 2,748
|
Post by Sandboxcowboy on Feb 23, 2010 15:59:09 GMT -4
yeah what alan said. i could do it to my 88 stuff but its not worth it anymore unless u get the stuff for free and have access to the press......... Im not even sure they still make the replacements like that anymore..........??
|
|
|
Post by itsakeeper on Feb 23, 2010 16:36:58 GMT -4
outer races are machined into the housing, so sol.........
|
|