adjustable rear upper control arms

[badwithcomputer]

Hey Guys and Gals,

Looking for someone selling a set of rear adjustable upper control arms so I can run my SYE. Either new from a vendor or used, let me know a price.

Thanks,

Brandon

[adpmcpl]

zone has an alignment kit.

zoneoffroad.com/product-acc?ki=154&gr=2

[iwonajeep]

www.roughcountry.com/jeep_xtras_xflex-control-arms.html
I can get you these.

[badwithcomputer]

Apr 15, 2010 5:45:04 GMT -4 adpmcpl said:

zone has an alignment kit.

zoneoffroad.com/product-acc?ki=154&gr=2

Hey thanks, but i'll still need the adjustable control arms...i think?

[4X4PLAY]

Apr 15, 2010 8:23:18 GMT -4 badwithcomputer said:

Apr 15, 2010 5:45:04 GMT -4 adpmcpl said:

zone has an alignment kit.

zoneoffroad.com/product-acc?ki=154&gr=2

Hey thanks, but i'll still need the adjustable control arms...i think?

Yes you do, the Rough Country ones that Iboughtajeep posted above are nice and will do what you want...if you do get the Rough Country ones, I recommend you pick up a tube of white lithium to keep them greased(or else they WILL squeak!) and also if your pinion needs to be turned quite a bit I found that the Rough Country arms aren't long enough and need a lil' modification to make them long enough.


Jeff

[Bubba]

Apr 15, 2010 5:59:03 GMT -4 iwonajeep said:

www.roughcountry.com/jeep_xtras_xflex-control-arms.html
I can get you these.

Same price as listed here? I should have a set as well.

Rick

[badwithcomputer]

Yes you do, the Rough Country ones that Iboughtajeep posted above are nice and will do what you want...if you do get the Rough Country ones, I recommend you pick up a tube of white lithium to keep them greased(or else they WILL squeak!) and also if your pinion needs to be turned quite a bit I found that the Rough Country arms aren't long enough and need a lil' modification to make them long enough.


Jeff

Hey Jeff,

What kind of modifications are we talking about? Im running a 4" lift would the pinion have to be turned that much to exceed the capabilities of the RC upper control arms? or does it go on a case by case basis?

Thanks

[4X4PLAY]

I would highly doubt that you would need to modify them at all...I needed to lengthen Cindy's after we swapped in her Rubi d44 but they would have been fine with her stock axle...in the worst case scenario, Rick would be able to lengthen them very easily...If I was looking to do what you are doing, I would definitely buy the RC arms, they are quite beefy, just make sure you put lithium grease to them before you install them...


Cheers!
Jeff

[iwonajeep]

I can sell those arms for the web price of $179.00.

[badwithcomputer]

awesome do you think you can get two sets? i know another fella might be interested as well but i'll have to check with him first.

[iwonajeep]

I did order an extra pair.