Old Yeller
Jeeper
Its... sitting next to my garage. Poor girl.
Posts: 2,890
|
Post by Old Yeller on Oct 9, 2005 16:34:46 GMT -4
Ok, this may be very simple, but as a YJ owner, I have no idea. How do the front marker lights stay inside the flare? I can put it in place, but there is nothing keeping it there.  |
|
J*E*E*P
Jeeper
NorthNova
Posts: 3,084
|
Post by J*E*E*P on Oct 9, 2005 16:59:24 GMT -4
From the pic I would say that the two end tabs go over the inside cutout lip and the round long tab should pressure fit thru the round hole at the oposit end. May have to slightly bent stuff to get it in.
|
|
Old Yeller
Jeeper
Its... sitting next to my garage. Poor girl.
Posts: 2,890
|
Post by Old Yeller on Oct 9, 2005 17:45:42 GMT -4
See thats the problem, it just drops in. The tabs do indeed hook in, and then that spike drops into the hole, but there is nothing to keep it in there. I'm thinking something to grab onto that spike.
Anyone with a TJ care to tell me how their signal lights are held in?
|
|
J*E*E*P
Jeeper
NorthNova
Posts: 3,084
|
Post by J*E*E*P on Oct 9, 2005 18:41:41 GMT -4
OK OK I got off my ass and went out into the garage and looked (had to piss anyways) you should have got a combo nut and washer it threads over that long part.
|
|
Old Yeller
Jeeper
Its... sitting next to my garage. Poor girl.
Posts: 2,890
|
Post by Old Yeller on Oct 9, 2005 18:50:51 GMT -4
Hmm, didn't receive any hardware when I got the lights (cough Tim cough  ). I think you mean one of them thin nuts that cuts its own groove. I'll have to see what I can do to rig it up. Woulda been nice if omix provided the 2 cents worth of hardware to put em on. |
|
J*E*E*P
Jeeper
NorthNova
Posts: 3,084
|
Post by J*E*E*P on Oct 9, 2005 19:14:11 GMT -4
Yes Sir, the one's that cut their own groove. Be very carefull you dont break off that long plastic part or you may be  |
|
2XS
Jeeper
Posts: 797
|
Post by 2XS on Oct 10, 2005 18:50:42 GMT -4
never looked in the box for that , I suppose they are expecting that you have the old one, which u obviously dont. anyway, I used regular nuts on mine, it is easier to get on and off later
|
|
). I think you mean one of them thin nuts that cuts its own groove. I'll have to see what I can do to rig it up. Woulda been nice if omix provided the 2 cents worth of hardware to put em on.
