Sandboxcowboy
Jeeper
Oh yes, please tell me how deep that mud puddle was in beaver bank.....
Posts: 2,748
|
Post by Sandboxcowboy on Oct 24, 2009 16:32:58 GMT -4
curious to see how it does in action! did you use existing cowl ducting for the defrost?
|
|
Hawkes
Hardcore
Lurker
Posts: 5,404
|
Post by Hawkes on Oct 24, 2009 16:47:08 GMT -4
curious to see how it does in action! did you use existing cowl ducting for the defrost? Yes, I tied right into the factory defrost ducts. The ABS goes right up against the defrost tube, I couldn't find anything abs to tie them together so I used a piece of the factory flex to seal it. It's longer than it needs to be. Funny place to rust, must not get paint up there.
|
|
Hawkes
Hardcore
Lurker
Posts: 5,404
|
Post by Hawkes on Nov 6, 2009 23:10:08 GMT -4
Heater is awesome. Jeep is all back together, just need an inspection.
|
|
Sandboxcowboy
Jeeper
Oh yes, please tell me how deep that mud puddle was in beaver bank.....
Posts: 2,748
|
Post by Sandboxcowboy on Nov 9, 2009 0:05:28 GMT -4
sweet, might go this route when i swap engines. makes room for a cage and storage!!!
|
|