|
|
Post by itsakeeper on Jun 11, 2012 19:28:55 GMT -4
anyone recognize this ? had a leak in donkeys 14 bolt and found this stuck to the magnet, can't see any damage, small amount of fine filings on magnet and this piece  |
|
|
|
Post by chefted on Jun 11, 2012 19:32:38 GMT -4
Looks like a thrust washer, from behind the side gear
|
|
rue
Jeeper
Buggy!
DARE YA
Posts: 2,022
|
Post by rue on Jun 11, 2012 20:41:03 GMT -4
X2
|
|
|
|
Post by itsakeeper on Jun 11, 2012 21:45:28 GMT -4
it's a spool, so no sidegears but still thrust washers ?
|
|
|
|
Post by chefted on Jun 12, 2012 7:31:06 GMT -4
Full spool, or mini? If it is a full spool could be just left overs from earlier carnage
|
|
|
|
Post by ©Big6™ on Jun 12, 2012 9:17:36 GMT -4
Just blame it on Ray!
|
|
|
|
Post by itsakeeper on Jun 12, 2012 9:23:07 GMT -4
Yep, thinkin leftovers, whew !!! Back together tonite
|
|
Creepy
Administrator 
Dartmouth
Posts: 18,718
|
Post by Creepy on Jun 12, 2012 9:51:43 GMT -4
it's a spool, so no sidegears but still thrust washers ? a mini spool will still use thrust washers, but they don't spin. Not having them in place will allow side to side movement, increasing clearance around the drive pin thru the carrier. I'd fix it. The pin will get beat to hell and break. Not familiar with 14bolt, but that's what would happen on a normal carrier with one pin. I know some 14bolts have 4pins and a split carrier. If its a full case spool, no washers. |
|
|
|
Post by itsakeeper on Jun 12, 2012 17:02:20 GMT -4
well since no-one can remember what was in it, I'll take the carrier out and have a look - just sealed it up thinking it was a spool but now I'm not so sure - oh well at least I didn't fill it up yet.
|
|
|
|
Post by DamnJeep on Jun 12, 2012 19:23:28 GMT -4
Could be the orb of traction. In which case the washers would still be there.
|
|
The Garagemahal
Moderator 
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Jun 12, 2012 19:24:55 GMT -4
Are you sure it's a spool ?? I remember getting a 14 bolt carrier welded up for ray
|
|
|
|
Post by itsakeeper on Jun 12, 2012 19:41:31 GMT -4
not sure about anything - I thought the front D60 was welded and for some reason thought the 14bolt was a spool - at the Rubi now so it will have to wait
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Jun 13, 2012 8:15:03 GMT -4
If its welded 'orb of traction' (love that lol) those could fall out and it doesn't matter.
There is no need to remove the carrier, all you have to do is look at it with the diff cover off.
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Jun 13, 2012 8:48:17 GMT -4
I believe the spiders are incased in the case. So only way to tell is to take it apart
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Jun 13, 2012 9:43:15 GMT -4
Oh. no little windows, eh? Oh well. Full- float not too bad to pull axles.
|
|
