|
Post by DamnJeep on Sept 15, 2013 19:41:13 GMT -4
Picked up a set of HJ61 axles today for 200. Off-set to the passenger side. Should work well for the mid engine buggy. Thanks for pointing them out Scott! Uploaded with ImageShack.usUploaded with ImageShack.usI noticed the rear axle has a bolt on cover as well as the drop out.
|
|
rue
Jeeper
Buggy!
DARE YA
Posts: 2,022
|
Post by rue on Sept 15, 2013 20:45:21 GMT -4
Cool, Im lookin forward to this.
|
|
chevystroker
Jeeper
NEVER CONFUSE HAVING A CAREER WITH HAVING A LIFE ! ! ! ! ! !
Posts: 896
|
Post by chevystroker on Sept 15, 2013 20:54:51 GMT -4
Looks like it is off a right hand drive. Bonus is the inspection cover on the rear diff. Could probably change the front over to that style as well if needed. Are the knuckles, axle tubes, etc bigger than the 1/4 ton pickups? The diffs look bigger.
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Sept 16, 2013 6:22:59 GMT -4
Was there a high pinion?
|
|
ronin
Jeeper
Out on the Mira
Posts: 661
|
Post by ronin on Sept 16, 2013 9:19:11 GMT -4
Looks like it is off a right hand drive. Bonus is the inspection cover on the rear diff. Could probably change the front over to that style as well if needed. Are the knuckles, axle tubes, etc bigger than the 1/4 ton pickups? The diffs look bigger. Diff could be 9 1/4" but could also be c clip . Some were FF
|
|
|
Post by DamnJeep on Sept 16, 2013 16:08:57 GMT -4
I didn't look at the other set. But he is willing to sell them cheap if anyone is interested... I'll post more once I get a chance to open them up.
|
|
|
Post by 53m38 on Sept 16, 2013 20:53:48 GMT -4
What's the width of those?
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Sept 16, 2013 21:03:30 GMT -4
I didn't look at the other set. But he is willing to sell them cheap if anyone is interested... I'll post more once I get a chance to open them up. Glad to help What was the other set ?
|
|
|
Post by chefted on Sept 17, 2013 7:27:49 GMT -4
If memory serves they are 9.5"ring gear. 30 spline, unless they are the rare 10 spline. All low pinion.
|
|
|
Post by DamnJeep on Sept 17, 2013 8:34:57 GMT -4
What's the width of those? They are narrow. About 58" wms.
|
|
|
Post by 53m38 on Sept 18, 2013 20:22:48 GMT -4
Ok, thanks
|
|