|
|
Post by Zach "Hulltech Redneck" on Feb 2, 2014 19:50:21 GMT -4
Hey guys I am in need of this fitting m.ebay.com/itm?itemId=261220157123 , ASAP broke it taking trans out of my truck 47re anyone have one or know where to get one asap Found!! ok I am on the hunt again, I broke the detent shifter lever inside the trans on my cummins, she is a 96 with the 47 re/rh with lock up, www.jcwhitney.com/ac-delco-oe-replacement-shift-detent-lever/p3042131.jcwxany one have anything? any old Chrysler transmissions sitting around? I need one as soon as I can get it, don't want to wait for shipping. Sent from my GT-S5830D using proboards |
|
chevystroker
Jeeper
NEVER CONFUSE HAVING A CAREER WITH HAVING A LIFE ! ! ! ! ! !
Posts: 896
|
Post by chevystroker on Feb 2, 2014 21:36:29 GMT -4
Dealer or NAPA should have one. Might be able to make one using a 1/4 NPT nipple with an adapter fitting from 1/4 NPT to 1/2 NPT. OR, the Parker Hydraulics store on Akerley in burnside may have one to fit. Or, screw in a hose nipple with 1/4 NPT end, and use a short piece of rubber line to connect to the cooler line. Of course, that could mean cutting the end and fitting off the cooler line, unless you can find a hose nipple with a male 1/2 NPT fitting. Depends on how desperate you are to get it running.  |
|
The Garagemahal
Moderator 
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Feb 2, 2014 21:47:41 GMT -4
Do you need it tonight ?
|
|
|
|
Post by Zach "Hulltech Redneck" on Feb 2, 2014 21:49:29 GMT -4
Not tonight was aiming to try and get one tomorrow, you have any thing down there scott?
Sent from my GT-S5830D using proboards
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Feb 2, 2014 21:51:56 GMT -4
I have to double check , but I might have one ( not dodge specific , just some brass fittings )
|
|
|
|
Post by Zach "Hulltech Redneck" on Feb 2, 2014 21:51:59 GMT -4
Ok I have a sort of temporary one made, mine broke so I taped it and such, , what I need it 1/4 npt to 1/2 female flare
Sent from my GT-S5830D using proboards
|
|
|
|
Post by itsakeeper on Feb 3, 2014 6:06:02 GMT -4
Strictly or PA
|
|
|
|
Post by Zach "Hulltech Redneck" on Feb 3, 2014 19:23:26 GMT -4
I got one at Parson parker hydraulics,
|
|
