FS or TRADE : XJ parts ( cheap )

[johnnybebad]

I have a 1993 Cherokee that I am parting out. I am selling interior pieces and body panels, the motor & drivetrain are not for sale nor are the axles. It has a good grey interior and the body panels are all in useable shape ( burgundy in color ) . If you need anything feel free to ask as I would much rather see these parts go to good use than rust away. I am also looking for a few ZJ parts

[ryanmac1988]

i need a drive shaft and rocker panels and a transfercase if its still good and the radiator let me know what u wan't for thease parts

[johnnybebad]

driveshaft and tcase are gone . the rockers don`t have any holes in them but I don`t know if they have been fixed before or not. Rad was shot when I got the JEEP

Where are you located? If it`s not too far I`ll cut them out for you

[johndavid]

nNEED HOLE DASH AND WIRING HARNESS HOW MUCH

[johnnybebad]

for the entire dash and harness ? hows $75 sound ? I am going to keep the PCM though. Let me know if this is good for you

[BawgBoy]

Where are you located? I need:
- front bumper
- pass side front fender
- pass side headlight bezel
- pass side park and signal light lenses
- may just take the whole front section (hood forward), the fiberglass clip, grill headlights, etc.
- also interested in the front seats if they're in good shape
PM me your number
Thanks

[johnnybebad]

Pm`d ya .
Seats are in good condition ( grey )

[ryanmac1988]

i live in sackville i also need the stering colom

[johnnybebad]

yep that can be done, perhaps I should just list whats for sale and how much I`d like to get for everything,lol.
I`ll part out everything but if you want a package here`s what you`ll get


1993 XJ parts

complete grey interior ( seats , rug , panels , dash including cluster and wiring , console ) - $100

steering column - $ 50

complete front clip ( fenders hood , rad support, nose , headlights, front bumper) $150

rear taillights with AVS shades already stuck to them $20

all 4 fender flares - $40

doors- all 4 for $100 ( plus your old doors as I`m going to use the shell for storage of parts ) or $30 each

rear hatch - $50 ( plus your old one )

rocker panels cut from the body - $ 30 ( not bad seeing as it`ll cost 20 in cutting discs )

these are just offers and like i`ve stated I`ll trade parts for parts, I own a ZJ and I need a few things for it, so if I can help you out feel free to PM or email me, thanks guys

[ryanmac1988]

i wan't the stering colom and i'll cut the rocker pannels mi self if u wanna give them away

[johnnybebad]

I`ll do ya one better , how about $75 for the column and the rockers ?? I`ll cut them out for ya

[johnnybebad]

just to add....

I took the gas tank out today and before I bought the JEEP the owner told me he had a brand new one put in last spring, I figured maybe it was a 'new southern' one and never thought anymore of it....turns out it is brand new as in BRAND NEW !! still nice and shiny on top and undercoated on the sides !!
I`ll sell it for $75 with the plastic skid still attached, $150 with the sending unit and pump still in it .

[johnnybebad]

I still have all these pieces so if anyone is interested in them at all feel free to PM me. I can take photos of the parts you want and I will also be around the valley next weekend so if you want to meet me there for anything we can work something out .
not looking to make a killing on these parts, just want to save ahead for some parts that I need for the ZJ.
thanks again

[tchase]

How's the lower dash panel on that rig? They seem to have a tendancy to crack just to the right of the ashtray. I'm talking about the piece that runs the full width of the dash that the ashtray sets into. Might be interested in that if, by some miracle, it is intact. Also may be interested in that gas tank, I'll let you know on that one. Thanks.

[johnnybebad]

hmmmmmm.......... i THINK it is in one piece
I`ll have a good look at it tomorrow and get a pic.