looking for someone to weld frame on a chev tracke

[94yota]

looking for someone to weld the frame on my 89 chevy tracker its getting really bad at the back drivers side from around the wheel back to the bumber the trailer hitch has completly let go there its that bad can take pics must be around the truro or pictou county area and priced reasonable

[Paul Boudreau]

that sound like a good reason to sell



























and buy a real jeep lol

sorry couldn't resist ;D

[NW]

You prep it, and get all the metal to weld on and I can go to your place and lay down the beads.

Send me some pics, and some details of what you think needs to be done and I will give you a quote.

Neil

[94yota]

leave an email and i will send u some pics its pretty rough but just want the rig to make it through the rest of the winter then i will be done with it i think the top of the strut is rotted of the frame and the trailer hitch is rotted of on that side but i'm not worried about the very back cause it wont put me of the road if that completely lets go the bumper will just fall of i dont even know if it can be fixed but if something could be done to help hold it that would be great doesnt have to look good or anything just get me till the mvi runs out or just throught till may and then i will scrap it i dont drive it on the highway either just back and forth to work in the country

[MudMagnet]

i cut mine off just behind the little tow holes or what ever they are in the back of the frame... then cut the factory cab mounts off the old cut off pieces, then butted up a piece of 2x3x3/16" square tubing and welded it on, fish plated it with 1/8" plate, and then welded the factory cab mount back on... i did it toboth sides just cause i had the metal and it wasn't even all that bad to begin with, but its my off-road buggy do i wanted domthing strong to mount the bumper and cage to..... i think i got pics if you wanna e-mail me at [e-mail]

[Paul Boudreau]

you can always rebuilt with steel ;D