87wagoneer
Jeeper
Treasurer - Valley
The 89 is retired, and the 93, and the 90, and the other 90.
Posts: 339
|
Post by 87wagoneer on Dec 20, 2005 15:27:12 GMT -4
This might be a longshot, but Iam looking for an egr tube(from exhaust to intake) for a 89 6cyl. I broke mine when I put the header on and it is blocked off now. I would like to reinstall it if I can find one. Thanks, Kim.
|
|
justajeep
Moderator
Valley - VP
Bear River, NS
Posts: 7,214
|
Post by justajeep on Dec 20, 2005 17:52:53 GMT -4
I probably have one. I'll try to remember to look tomorrow.
|
|
Old Yeller
Jeeper
Its... sitting next to my garage. Poor girl.
Posts: 2,890
|
Post by Old Yeller on Dec 21, 2005 6:34:12 GMT -4
I ended up having to cut mine when I pulled my intake/exhaust manifold. I then got both ends welded shut. I have a computer bypass done to my 4.2L YJ, so it didn't make any difference since it is an emissions thing. Not sure in your case. Good luck. A new one from dealer was $50 for a 6" tube and 2 fittings so I opted to plug em.
|
|
gonejeepn
Jeeper
Treasurer - North Nova
NNTR-the hole tester
Posts: 2,311
|
Post by gonejeepn on Dec 21, 2005 7:00:19 GMT -4
most of the mechanics i have talk too just unhook the egr, it does little or nothing on a older engine.
|
|
87wagoneer
Jeeper
Treasurer - Valley
The 89 is retired, and the 93, and the 90, and the other 90.
Posts: 339
|
Post by 87wagoneer on Dec 21, 2005 11:57:02 GMT -4
I realize that I dont need the tube, it has been working fine for 8 months or so, however like I said if there is one around I would like to put it on. I think that when I calld the dealer here in Coldbrook, either they didnt service it or it was too pricey. There was a guy down Sherbourne way that thought he had one but I havent herd back. I just thought I would throw this out there just incase theres one floating around. Alan if you have one that would be great, let me know. Thanks, kim.
|
|
|
Post by xjunk on Dec 21, 2005 19:49:11 GMT -4
if you can get the end out and have the old tube i am sure a machine shop would make it for you
|
|
|
Post by xjunk on Dec 21, 2005 19:49:40 GMT -4
if you can get the end out and have the old tube i am sure a machine shop would make it for you
|
|