steve
Jeeper
buggy
Posts: 68
|
Post by steve on Jun 17, 2012 8:51:08 GMT -4
Were going to dust off more than dust on mikes tires when we hit the new trial thats being put in on our 86 acre play ground!!! Its called careys play ground! It just mite be the hardest trail yet! cant wait to see the parts fly!!!! good luck to any one that starts up the dark trail to hell !!!! pics will follow
|
|
rue
Jeeper
Buggy!
DARE YA
Posts: 2,022
|
Post by rue on Jun 17, 2012 9:34:04 GMT -4
I can hardy wait...going to be nasty..lol
|
|
Creepy
Administrator 
Dartmouth
Posts: 18,718
|
Post by Creepy on Jun 17, 2012 13:44:09 GMT -4
Sounds great! looking forward to some pics.
|
|
MudMagnet
Jeeper
heckler
covering Cape Breton, one Rock at a time!!!
Posts: 1,453
|
Post by MudMagnet on Jun 17, 2012 20:00:51 GMT -4
sat can't come soon enough..... time for a test run.... it'll either go or smoke a clutch.... either way is going to be a time ;D
|
|
Jeepy
Jeeper
Posts: 1,216
|
Post by Jeepy on Jun 19, 2012 16:46:43 GMT -4
I wish I could see that in person!
I have a used set of 4.11's for a 14 bolt, you probably want to go lower but they are yours if you want them.
|
|
steve
Jeeper
buggy
Posts: 68
|
Post by steve on Jun 19, 2012 18:37:51 GMT -4
I have a set of 4.11"s for a dana 60
|
|
MudMagnet
Jeeper
heckler
covering Cape Breton, one Rock at a time!!!
Posts: 1,453
|
Post by MudMagnet on Jun 19, 2012 22:02:33 GMT -4
thanks guys but i dont think thats enough differance to make it worth putting in.
|
|
MudMagnet
Jeeper
heckler
covering Cape Breton, one Rock at a time!!!
Posts: 1,453
|
Post by MudMagnet on Jul 8, 2012 21:36:08 GMT -4
good buy old junk  new 35 spline slugs  to match up to some new 35 spline stubs  all together ready to go in  my rear lower links were bent pretty bad  straightened them out on the pipe bender  then sleved it with one more piece of tubing, three layers now ;D   next on the list.... 5.38 R&P's  |
|
MudMagnet
Jeeper
heckler
covering Cape Breton, one Rock at a time!!!
Posts: 1,453
|
Post by MudMagnet on Jul 17, 2012 22:06:15 GMT -4
new 2.5 16 pro fender air shocks.... talk about beefy.... i ain't bending these. a little too much charge in them ;D   let some pressure out..... going to make its first run at this pressure, 6" of shaft. it'll settle some once it gets working. i want to run them about 4"   1.65" shaft, 5/8"s bolts for mounts.... they should hold up ;D  and after a little more hood trimming  its going to sit a bit higher than it did cause i couldn't raise them up hig enough without cutting the shock hoops off, so i have 1.5" less up travel. ride heigth will be 2.5" higher than before |
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Jul 17, 2012 22:41:01 GMT -4
Look like nice units.
|
|
|
|
Post by geezer on Jul 18, 2012 9:41:52 GMT -4
Man, playing with the big dogs cost a lot of money.lol
|
|
|
|
Post by mudandmore on Jul 18, 2012 10:30:10 GMT -4
Lookin good, I`m glad you like them, Keep the pic`s commin...
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Jul 18, 2012 15:31:55 GMT -4
re: the shock hoops and higher ride height....
with the extra width could you put the shocks outside the hoops, with taller brackets?
or do what you have there now, lean them in a bit more, and use tall brackets?
|
|
4X4PLAY
Elite
~ P.O.R.N. FOR SALE ~
Posts: 11,763
|
Post by 4X4PLAY on Jul 18, 2012 15:44:57 GMT -4
Sweet! The Profender stuff is perty nice!!  Jeff |
|
MudMagnet
Jeeper
heckler
covering Cape Breton, one Rock at a time!!!
Posts: 1,453
|
Post by MudMagnet on Jul 18, 2012 16:24:57 GMT -4
re: the shock hoops and higher ride height.... with the extra width could you put the shocks outside the hoops, with taller brackets? or do what you have there now, lean them in a bit more, and use tall brackets? don't want them on the outside cause they'll get smashed up.... can't raise them up anymore unless i lean them in more, and can't do that cause they hit the frame at full drop. had to knotch the pass frame to fit as they are now |
|
