|
Post by redkj666 on Aug 9, 2012 8:14:32 GMT -4
This trail basically goes in on baxter rd and comes out at Dolan lake up golden grove, Running this trail was the most fun I've had on a trail with it so far.
|
|
|
Post by TomWood on Aug 9, 2012 10:46:51 GMT -4
Nice, next time im up ill have to check it out.
|
|
|
Post by redkj666 on Aug 11, 2012 19:54:16 GMT -4
Oh I almost forgot about these pictures from when Derecks Tires where at my place What do ya think?
|
|
|
Post by TomWood on Aug 13, 2012 13:56:26 GMT -4
Think you may need another few inches of lift, and some massive sawsalls to remove most of the wheel wells
|
|
|
Post by redkj666 on Sept 30, 2012 11:24:40 GMT -4
I'm replacing my Aluminum G2 front Diff Cover because of clearance issues, Is anyone on here running a Teraflex Diff Cover? I'm just about to order one up from Northridge, and am looking for a local review.
|
|
|
Post by redkj666 on Oct 15, 2012 23:33:49 GMT -4
My GF went and did the NBJC Ladies Run AKA Jeepin' For the Cure and when she returned home proceeded to tell me that there was a bad U-joint, I checked it over quick in the driveway and they all looked good so I figured I'd check it out a little closer on my buddies hoist and change my Diff cover while I was there. I then proceed to pop the Diff cover off to find this..... every single bolt in the ring gear was lossened off finger tight and some as you can see where a little worse than others, over the past 2 or 3 weekends I had been hearing a slight ping that I wrote off as being the Aussie Locker doing it's thing I guess not lol. I ended up being really lucky tho no damage to the Pinion or Ring gear and no unusual noises now that it's back together, I also had a loose pinion bearing so I changed all that junk too so now it's back to the races.
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Oct 19, 2012 8:12:15 GMT -4
Lock tight is your friend here !
|
|
|
Post by redkj666 on Oct 24, 2012 17:37:36 GMT -4
Lock tight is your friend here ! Yupp somebody missed that Memo....
|
|
|
Post by redkj666 on Oct 29, 2012 20:55:14 GMT -4
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Oct 30, 2012 9:07:11 GMT -4
haha, looks fun.
|
|
|
Post by bighair on Oct 30, 2012 17:18:13 GMT -4
Lock tight is your friend here ! Yupp somebody missed that Memo.... I used locktite on all the ring gear bolts and the cap bolts and torqued to spec.
|
|
|
Post by TomWood on Nov 9, 2012 9:42:59 GMT -4
Good that the noises went away when re-torqued, also, its awesome seeing a Liberty crush some cars lol!
|
|