willyswagon
Jeeper
King of the last minute Road Trip
Posts: 610
|
Post by willyswagon on Jan 29, 2010 11:28:34 GMT -4
You must have scared the bejesus out of the wally-world guys who loaded yer truck showing up in that Actually the guys that loaded it at the local Home Hardware/Sears Depot weren't phased a bit. They see the truck around all the time, and have seen it at the lumber yard, carrying gravel, top soil, towing the skiff, its just another old truck up here They were impressed by the rack choice. One of the guys that loaded it just finished a 70 Chev half ton, he did a great job !
|
|
|
Post by tothewall on Jan 29, 2010 15:13:30 GMT -4
I think it needs a 327
|
|
willyswagon
Jeeper
King of the last minute Road Trip
Posts: 610
|
Post by willyswagon on Jan 29, 2010 16:13:20 GMT -4
Wrong rig Len Try to keep them straight One original 6cyl, 6 volt, one not so much original ;D The 327 is in this one
|
|
|
Post by tothewall on Jan 29, 2010 16:22:56 GMT -4
I think two rigs with 327s is not excessive. LOL
|
|
|
Post by theonlybull on Jan 29, 2010 18:26:32 GMT -4
I think two rigs with 327s is not excessive. LOL i think it is len...... the other should definatly be an LT1, or a northstar v8...... or at the very least a big block
|
|
willyswagon
Jeeper
King of the last minute Road Trip
Posts: 610
|
Post by willyswagon on Jan 29, 2010 19:45:59 GMT -4
I think two rigs with 327s is not excessive. LOL i think it is len...... the other should definatly be an LT1, or a northstar v8...... or at the very least a big block I'm thinking 572 with a 4 core al radiator? I found one at a GM dealer that is going out of Business. ;D They also have a 502 sq( 502 cu in, 502 hp) cash deal
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Feb 25, 2010 14:58:33 GMT -4
Is this what you were after? i'll scribble down the dims so you can check that it fits. I had the more square one done before you sent me the pointy pic. must be different logos over the years.
|
|
bill richards
Jeeper
Millwood Marauder
mud re-freshener
Posts: 4,169
|
Post by bill richards on Feb 25, 2010 15:04:08 GMT -4
Nice... never seen/noticed the square version before. Those look great!
Bill
|
|
▲▲▲▲
Jeeper
Twister of the Panties
Posts: 565
|
Post by ▲▲▲▲ on Feb 25, 2010 15:11:21 GMT -4
Nice... never seen/noticed the square version before. Those look great! Bill
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Feb 25, 2010 15:13:27 GMT -4
that one is different again. Its tall like the pointy one, but square.
I drew both mine manually from photo's of emblems, close as I could.
|
|
willyswagon
Jeeper
King of the last minute Road Trip
Posts: 610
|
Post by willyswagon on Feb 25, 2010 15:34:40 GMT -4
They look great Jan. I'll pick them up the next time I'm over
|
|
bill richards
Jeeper
Millwood Marauder
mud re-freshener
Posts: 4,169
|
Post by bill richards on Feb 25, 2010 15:39:00 GMT -4
Ahh yes... the three dimensional look of that one would get lost when put onto metal.
I dig the pointy versions the best.
Bill
|
|
Shiny
Jeeper
Growing old is Inevitable, Growing up is Optional !
Posts: 1,331
|
Post by Shiny on Feb 25, 2010 16:58:13 GMT -4
its amazing how fine those points can get awsome!
|
|
willyswagon
Jeeper
King of the last minute Road Trip
Posts: 610
|
Post by willyswagon on Feb 25, 2010 17:41:25 GMT -4
Ahh yes... the three dimensional look of that one would get lost when put onto metal. I dig the pointy versions the best. Bill That's why I wanted the pointy one. It gives it depth.
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Feb 25, 2010 23:07:09 GMT -4
its amazing how fine those points can get awsome! 200 inch per minute @ 45 Amps.
|
|