|
Post by Cherokee Chief on Apr 1, 2008 16:34:35 GMT -4
No lift as of yet. I'm going to add a 2" block in rear then putting Grand Cherokee V8 coils up front. Hopefully that will level it out. I don't know why it sets up so high in the rear right now .The rear springs are out of a 87 Cherokee 4cyl. And no springs were added or replaced.
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Apr 1, 2008 17:53:18 GMT -4
i like the steel source lol
looks good.
|
|
|
Post by Cherokee Chief on Apr 1, 2008 19:57:50 GMT -4
i like the steel source lol looks good. My front bumper (not shown yet its on the Comanche) is made from the same stuff as well. Only problem I ran out making the rock rails thats why I had to join 2 pieces together.
|
|
|
Post by HardKorTJ on Apr 1, 2008 20:26:02 GMT -4
i remember seeing that jeep a while ago, it was rolling on Krawlers
|
|
|
Post by Cherokee Chief on Apr 2, 2008 16:48:07 GMT -4
Here is what I got done today. Not much but it's something Before I cut the sills. After the cut. With the new rock rail installed. Now all I got to do is tie the floor into the rails and presto the floor is done. Man I wish it would go that easy and quick.
|
|
|
Post by tothewall on Apr 4, 2008 8:34:56 GMT -4
That looks like something from Big G's "Yellow Period" LMAO I am sure that there is SOMEONE who must have pix.
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Apr 6, 2008 12:05:04 GMT -4
you are fast!
|
|
|
Post by Cherokee Chief on Apr 7, 2008 19:39:05 GMT -4
Just got home from working on the Cherokee. Not much pictures but a lot done I guess. Right side inner sill tacked in, right side floor tacked in. Hopefully tomorrow I will finish welding them in place. Man its slow going
|
|
|
Post by projectnightmare on Apr 7, 2008 19:52:57 GMT -4
that's some nice work. looks like it's gonna be solid.
|
|
Hawkes
Hardcore
Lurker
Posts: 5,404
|
Post by Hawkes on Apr 7, 2008 19:53:41 GMT -4
Looks good though. Subframes in pretty good shape.
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Apr 7, 2008 20:02:16 GMT -4
Nice werk on the floors
|
|
|
Post by Cherokee Chief on Apr 15, 2008 16:46:15 GMT -4
OK here I am again. Not much for pictures cause this floor stuff is downright slow. Got both sides permitally welded and started on the dogleg/step plate areas,man they should be called Bear legs cause the are such a bear to make. ;D Drivers side floor rear section. Drivers side front section. Drivers side step plate area before. Drivers side step plate area after but not quite done. Passengers side step plate area.
|
|
Muttley
Jeeper
Looking forward to getting back out in 2010
Posts: 303
|
Post by Muttley on Apr 15, 2008 20:55:44 GMT -4
That is some neat fabrication. You make metal folding look like origami ;D Can't wait to see this beast hit the trails.
|
|
bill richards
Jeeper
Millwood Marauder
mud re-freshener
Posts: 4,169
|
Post by bill richards on Apr 16, 2008 14:59:50 GMT -4
man... I'm impressed with the amount of bead you're able to lay down without burning through that sheet! Bill
|
|
|
Post by Paul Boudreau on Apr 16, 2008 17:43:08 GMT -4
good work look like you know wath your doing alway replace rust with new metal
|
|