Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on May 28, 2012 19:14:27 GMT -4
24" deep cabinets overhead. then you can sneak in 12" shelves below, and a light under the cabinet. you could back the area under the cabinets with the cheap ($15) PA boxhanger stuff. There's a wack of them there right now. one kits covers about 24x24. that stuff I have above my table.
|
|
coolwind1
Moderator
President - Halifax Chapter
Posts: 1,318
|
Post by coolwind1 on May 28, 2012 19:29:15 GMT -4
Figure out the tallest item that you will be using on the table, measure that and add atleast 2". This is what I usually do when installing them in an office. Never less than 24" though.
|
|