|
Post by DamnJeep on Mar 11, 2012 18:22:29 GMT -4
HALP! Can you bend a full 180 degrees? I am in need of 4 full hoops for my struts and I want a better bend than what I can do here. Uploaded with ImageShack.us
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Mar 11, 2012 22:21:52 GMT -4
Yep. 3/4", 1.25", 1.5" pipe. OD's are 1, 1.6, 1.9.
The small die is a 3" rad, looks like that would work good if you are making a hoop off that fender bar, to capture the top of the strut. Can burn out a plate too.
|
|
|
Post by DamnJeep on Mar 12, 2012 7:36:48 GMT -4
Yep. 3/4", 1.25", 1.5" pipe. OD's are 1, 1.6, 1.9. The small die is a 3" rad, looks like that would work good if you are making a hoop off that fender bar, to capture the top of the strut. Can burn out a plate too. Yep thats what I'm looking for. The 3 inch rad. is for the 3/4 pipe I assume? What is the tightest bend for the 1.25 pipe? When can you do it?
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Mar 12, 2012 8:33:45 GMT -4
Yes, the small die is 3/4" pipe, 3" rad. the 1.25 rad is 4.5" iirc.
I can do it Tues, or any afternoon between 3-6pm while I'm on shift.
You supplying material?
|
|
MudMagnet
Jeeper
heckler
covering Cape Breton, one Rock at a time!!!
Posts: 1,453
|
Post by MudMagnet on Mar 12, 2012 16:14:22 GMT -4
he sure can
|
|
|
Post by DamnJeep on Mar 12, 2012 16:37:32 GMT -4
Yes, the small die is 3/4" pipe, 3" rad. the 1.25 rad is 4.5" iirc. I can do it Tues, or any afternoon between 3-6pm while I'm on shift. You supplying material? I'll have to pick up some 3/4" pipe. Have lots of 1" and 1.25" but I want a smaller radius. See you tomorrow afternoon?
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Mar 13, 2012 10:44:19 GMT -4
OK, I'm not going anywhere I don't think. Give a buzz b4 heading over tho. Frig knows.
|
|
|
Post by DamnJeep on Mar 13, 2012 12:54:37 GMT -4
OK, I'm not going anywhere I don't think. Give a buzz b4 heading over tho. Frig knows. Gaa! I don't have your number anymore! I lost it when my old computer died. I'll take a chance anyway!
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on Mar 13, 2012 13:06:43 GMT -4
830-4927 I'm here.
|
|