|
Welding
Mar 26, 2013 9:12:12 GMT -4
Post by donsjeep on Mar 26, 2013 9:12:12 GMT -4
Hi all. I have never welded but am interested in learning. I figure in the future when things bust it would be a good skill to know. Was just wondering what would be the easiest to learn? And what type of welder and gear would you recommend?
|
|
justajeep
Moderator
Valley - VP
Bear River, NS
Posts: 7,214
|
Welding
Mar 26, 2013 9:30:40 GMT -4
Post by justajeep on Mar 26, 2013 9:30:40 GMT -4
A 140 amp mig welder (110 or 220) is good for most any work you would be doing on a Jeep yourself. Look for the Lincoln ones to come on sale at CT, they are a great welder for home use. Flux core wire will get you welding cheaper, but using solid wire and gas is better.
Get an auto darkening helmet, gloves, eye and ear protection, and a mini grinder.
Pick up some steel of various thickness, from sheet metal up to 1/4" plate(I'm sure if you ask on here someone will have scrap they could give you).
Pick up a book or watch youtube vids and start practicing. Take pics of your welds and post them here and we can give you pointers to help you get better.
|
|
|
Welding
Mar 26, 2013 10:03:15 GMT -4
Post by donsjeep on Mar 26, 2013 10:03:15 GMT -4
Thanks! Looks like I got some shopping to do!
|
|
|
Welding
Mar 26, 2013 11:27:01 GMT -4
Post by 97cherokee on Mar 26, 2013 11:27:01 GMT -4
Get a chipping hammer and wire brush if your using flux core I am it's fine to use works well just have to get the slag off after I also have a auto dark helmet cheepie from princess auto and I Lincoln mig180 220v and it will do up to 1/2"
|
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Welding
Mar 26, 2013 16:38:18 GMT -4
Post by Creepy on Mar 26, 2013 16:38:18 GMT -4
Also of note is that the flux-core is good for dirty work, rust and body-sealer crap. Gas mig works better on clean prepped metal. The appearance of gas mig is also much much better.
Its really a matter of buying a machine and practicing. Its not overly hard.
|
|