|
|
Post by casey on May 7, 2013 14:53:22 GMT -4
anyone else with a twin disc clutch? anyone local able to get them? My truck came with one installed and i think its getting tired. looking for a replacement or another option.
|
|
|
|
Post by chefted on May 7, 2013 15:13:38 GMT -4
We sell them
|
|
|
|
Post by casey on May 7, 2013 16:13:17 GMT -4
Cool, price some out, not sure what model I have now or what one is best for towing. I'm sure its 3 or 4gs
|
|
|
|
Post by chefted on May 7, 2013 19:08:50 GMT -4
R you sure you have the twin, they are very loud, don't usually recommend them, what mods do you have done to your cummins?
|
|
|
|
Post by casey on May 7, 2013 22:32:32 GMT -4
I sure its the twin, trouble I'm having is when on the boat ramp or backing up in a tight spot when loaded it will howl like its slipping. Still hauls ass fine under load only when first starting off. Maybe that's how they are but i think it slips. Mods are nothing crazy, air dog pump, rc injectors,1/2 inch lines, edge, banks intake, mbrp exhaust, that's all for hp adders
|
|
|
|
Post by BenConrad on May 9, 2013 11:30:56 GMT -4
I have 2 of the duramax twin discs and a 3850 feramic in my dodge. Is yours the organic, ceramic or feramic? My feramic will slip a bit until it gets some heat in it, but the ceramics in the duramax have been great.
|
|
|
|
Post by BenConrad on May 9, 2013 11:33:04 GMT -4
And twins usually sound like the throwout bearing is gone when you push the clutch in, if yours doesn't sound like that I'd be suspect to whether it is or not.
|
|
|
|
Post by casey on May 9, 2013 14:45:20 GMT -4
Yeah with the clutch in it sounds like that, I have the recipt for it somewhere I know its a twin south bend.
|
|
|
|
Post by BenConrad on May 9, 2013 15:42:07 GMT -4
Probably worth a call To peter or manseil at south bend. They can probably tell you what's going on or point you in the right direction. The double discs are rebuildable as well, but you'd have to send it back to them to have it done.
|
|
|
|
Post by casey on May 9, 2013 18:51:38 GMT -4
Do u tow with yours? Mine only does this when loaded heavy in a tight spot
|
|
|
|
Post by BenConrad on May 10, 2013 20:29:54 GMT -4
Duramax has a slide in dump bed and yes I tow with it. The dodge used to drag a tandem dually gooseneck at around 450 hp and never had an issue. Also tows this without issue
|
|
Creepy
Administrator 
Dartmouth
Posts: 18,718
|
Post by Creepy on May 11, 2013 13:02:33 GMT -4
Dang!  |
|
|
|
Post by C Monster on May 11, 2013 14:49:28 GMT -4
Duramax has a slide in dump bed and yes I tow with it. The dodge used to drag a tandem dually gooseneck at around 450 hp and never had an issue. Also tows this without issue O my now thats towing |
|
|
|
Post by casey on May 14, 2013 21:23:45 GMT -4
Duramax has a slide in dump bed and yes I tow with it. The dodge used to drag a tandem dually gooseneck at around 450 hp and never had an issue. Also tows this without issue I will contact south bend tomorrow, I could have burned the truck today. Had my hyro gooseneck with a good size boat on and when backing up the truck just wants to jerk and jump. 4low, 4high, 2wd don't matter. But starting off on a steep hill no prob, wants to spin the tires. Thinking about going with a stock napa clutch |
|
Creepy
Administrator
Dartmouth
Posts: 18,718
|
Post by Creepy on May 14, 2013 22:11:08 GMT -4
No slip? It hooks up too much? hah, sucky for boats. maybe its too aggressive and meant to sledpull.
Doesn't sound like you need it, you need something closer to stock so you can feather the clutch.
|
|
