|
|
Post by andrew7447 on May 23, 2014 7:26:34 GMT -4
|
|
|
|
Post by TomWood on May 23, 2014 7:34:01 GMT -4
Nice looking truck, wonder why it cannot be inspected in PEI anymore?
|
|
BawgBoy
Jeeper
"If it can't be fixed with a hammer...you have an electrical problem"
Posts: 441
|
Post by BawgBoy on May 23, 2014 7:38:37 GMT -4
What is that "track bar" connected to?
|
|
badwithcomputer
Jeeper
You have DC2's? You just made a new best friend.
Posts: 2,863 
|
Post by badwithcomputer on May 23, 2014 7:42:29 GMT -4
Looks like a steering box brace, you can just barely see the track bar peaking up behind the draglink, it puzzled me too for a minute.
|
|
eastcoastcam
Jeeper
Is it time to go wheeling yet??
Posts: 1,690
|
Post by eastcoastcam on May 23, 2014 7:44:43 GMT -4
Looks like a steering box brace, you can just barely see the track bar peaking up behind the draglink, it puzzled me too for a minute. Yeah, Same here... Took a bit to see what was going on there. Too much lift for a short arm setup , if it has what the ad says, 8" lift... It sure is clean for an 18 year old maritime vehicle. It must have been a southern US or Western Canadian truck... |
|
chevystroker
Jeeper
NEVER CONFUSE HAVING A CAREER WITH HAVING A LIFE ! ! ! ! ! !
Posts: 896
|
Post by chevystroker on May 23, 2014 7:56:05 GMT -4
Nice looking truck, wonder why it cannot be inspected in PEI anymore? Probably has a lot to do with the welded up dropped pitman arm.  Looks like two pitman arms welded together with flatbar reinforcing them.  Can't get that inspected here either.  |
|
The Garagemahal
Moderator 
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on May 23, 2014 8:45:09 GMT -4
86 was long box only , it's not a "real 86 "
|
|
|
|
Post by danodonn11 on May 23, 2014 8:48:07 GMT -4
|
|
|
|
Post by andrew7447 on May 23, 2014 8:56:46 GMT -4
$6800 bones though, thats alot of beer moneys gone. |
|
|
|
Post by bacon on May 23, 2014 17:30:48 GMT -4
That is some ugly hackery right there. Gee how come you can't find a shop to approve that beautiful pitman arm? Yikes!
|
|
Creepy
Administrator 
Dartmouth
Posts: 18,718
|
Post by Creepy on May 24, 2014 12:03:24 GMT -4
First one needs a high-steer kit, but looks worth the asking price. Floor job looks good. Only a D35 in the back, disco front axle. Couple of different welded tanks on it. Overflow, and two home-made gas tanks? The pitman is wack, needs to go for any sort of inspection. But what he has done there would prob be fine off-road for a while. Till box ripped out of frame. Nice bumpers. They are both pretty good looking. Not a fan of pocket flares, but they keep the roadside inspectors off your back. 'darkside Jeep' on the 2nd one. THIS is the Darkside. (Posting from Dartmouth, beeotch!!!)  |
|
Looks like two pitman arms welded together with flatbar reinforcing them. 
