MudMagnet
Jeeper
heckler
covering Cape Breton, one Rock at a time!!!
Posts: 1,453
|
Post by MudMagnet on Sept 26, 2014 18:18:50 GMT -4
Sold
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Sept 26, 2014 19:33:58 GMT -4
Is this yours Mike ?
|
|
MudMagnet
Jeeper
heckler
covering Cape Breton, one Rock at a time!!!
Posts: 1,453
|
Post by MudMagnet on Sept 26, 2014 20:36:40 GMT -4
Yes. The one I had on the Dakota. Then used it with the winch for lifting last winter on the toyota
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Sept 27, 2014 7:28:45 GMT -4
oH ok I thought it had a hydraulic lift
|
|
GOAT
Jeeper
Posts: 514
|
Post by GOAT on Sept 27, 2014 7:41:38 GMT -4
oH ok I thought it had a hydraulic lift Looks to be all there Scott...... looks to be a mast head that will need to be mounted to the frame ....... the two rams are there but I don't see the cylinder for up and down. Good price for a guy that can weld.... I am not sure what you are thinking of putting this on but the pump is run off the pulley and you might have to make a bracket to mount to the engine. Or go to PA and get a power pack and go electric / hydraulic.
|
|
MudMagnet
Jeeper
heckler
covering Cape Breton, one Rock at a time!!!
Posts: 1,453
|
Post by MudMagnet on Sept 27, 2014 20:12:16 GMT -4
All is there. Hydro lift and angle.
|
|
|
Post by vicklagina on Sept 30, 2014 15:50:38 GMT -4
Can you send me your contact information to come have a look?
|
|
MudMagnet
Jeeper
heckler
covering Cape Breton, one Rock at a time!!!
Posts: 1,453
|
Post by MudMagnet on Oct 7, 2014 11:53:11 GMT -4
Want it gone. $400
|
|
bc
N
Posts: 10
|
Post by bc on Oct 7, 2014 17:41:06 GMT -4
Will you be around on the weekend?
|
|