|
Post by C Monster on May 1, 2015 9:58:30 GMT -4
any one running a 1998 v8 ZJ drag link on a TJ the link that goes from the steering box to the pass. side wheel. the ZJ one is like $95 cheaper .than the TJ one I know there a little different ,than the TJ one. any one running one?? I ask because, I sold Rugged Ridge cross over steering stuff and building my tj into a more better driver than a off roader
|
|
|
Post by Nightpath on May 1, 2015 23:08:59 GMT -4
|
|
|
Post by C Monster on May 2, 2015 0:12:43 GMT -4
I know all of that, I all ready run and have run. The zj tie rod and tie ends On my tj. I'm talking about the drag link. I have bent 2 or 3 stock tj ones.
|
|
|
Post by Nightpath on May 2, 2015 7:32:59 GMT -4
I thought the zj and the tj drag link were the same and should go on without a problem.
|
|
|
Post by C Monster on May 3, 2015 0:37:14 GMT -4
nope the zj in way cheaper and a inch longer. has a bend at the end were the tie rod end goes on , that the TJ one
|
|
eastcoastcam
Jeeper
Is it time to go wheeling yet??
Posts: 1,690
|
Post by eastcoastcam on May 3, 2015 12:00:50 GMT -4
nope the zj in way cheaper and a inch longer. has a bend at the end were the tie rod end goes on , that the TJ one Couldn't you just thread on the sleeve and end a 1/2" each farther to compensate? More thread engagement if there is room (and some adjustment room, of course) would not be a bad thing.
|
|
|
Post by C Monster on May 3, 2015 15:18:43 GMT -4
nope the zj in way cheaper and a inch longer. has a bend at the end were the tie rod end goes on , that the TJ one Couldn't you just thread on the sleeve and end a 1/2" each farther to compensate? More thread engagement if there is room (and some adjustment room, of course) would not be a bad thing. I guess so. maybe I have to order one this week and see if it will fit of not
|
|
eastcoastcam
Jeeper
Is it time to go wheeling yet??
Posts: 1,690
|
Post by eastcoastcam on May 3, 2015 15:37:08 GMT -4
Couldn't you just thread on the sleeve and end a 1/2" each farther to compensate? More thread engagement if there is room (and some adjustment room, of course) would not be a bad thing. I guess so. maybe I have to order one this week and see if it will fit of not Is there a ZJ around town that you could look at and see how much more room is in the sleeve for adjustment? Then you wouldn't have to go through the hassle of returning, if it doesn't work...
|
|
|
Post by C Monster on May 3, 2015 17:58:32 GMT -4
I guess so. maybe I have to order one this week and see if it will fit of not Is there a ZJ around town that you could look at and see how much more room is in the sleeve for adjustment? Then you wouldn't have to go through the hassle of returning, if it doesn't work... That's OK. I seen them in person Before and in nightpath video, that guy puts one on his tj.
|
|