gonejeepn
Jeeper
Treasurer - North Nova
NNTR-the hole tester
Posts: 2,311
|
Post by gonejeepn on Jun 14, 2015 16:08:08 GMT -4
i am looking for a Ax15 to swap into my YJ. i think i have found a whole XJ as a donor. it is a 99. but now i am thing that the fuel injected 4.0 will bring the old girl to life. i know the fuel tanks wont work, different shape, but how much work to drop that into my YJ? the whole drive line engine trans tcase and wire it to work.
thanks for any help on this.
|
|
dan
Jeeper
Membership Co-ord - Valley
Posts: 3,397
|
Post by dan on Jun 15, 2015 5:26:17 GMT -4
The t-case shifter wont work. Yj uses a bolt holt on the trans as the main point of support. Xjs dont have the hole, or a spot to drill it.
Thats as much help as i can be
|
|
|
|
Post by falwith on Jun 15, 2015 17:12:38 GMT -4
Really? I was looking over specs and I found the AX-15 listed for both models in that year range. Odd to make 2 entirely different units with the same part number isn't it?
Is it possible the alternate transmission is missing said hole? I notice the Cherokee had the NV-3550 for 00 and 01 and the YJ lists a BA - 10/5 from 87-89. Outside those years, both models list the AX-15 by Aisin mated to the I6.
In either case, it sounds like you might want to confirm all holes, linkages and such are where they need to be, lol.
|
|
The Garagemahal
Moderator 
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
YJ trans.
Jun 15, 2015 17:43:10 GMT -4
via mobile
Post by The Garagemahal on Jun 15, 2015 17:43:10 GMT -4
They have different transfercase orientation
|
|
gonejeepn
Jeeper
Treasurer - North Nova
NNTR-the hole tester
Posts: 2,311
|
Post by gonejeepn on Jun 15, 2015 18:38:23 GMT -4
what do you mean by orientation?
|
|
gonejeepn
Jeeper
Treasurer - North Nova
NNTR-the hole tester
Posts: 2,311
|
Post by gonejeepn on Jun 15, 2015 18:39:05 GMT -4
sry for dumb questions? but i would like to try this set up IF it is doable.
|
|
|
|
Post by electroguy75 on Jun 15, 2015 19:13:47 GMT -4
i have an ax15 here, picked it up to do an internal to external slave conversion on a 90 yj. I believe it was out of a 97 tj. Anyway, if it's of any use to you come and get it. Includes tranny, bell housing (good only for internal slave), and master cylinder. PM me if interested, I live out in foxbrook
|
|
dan
Jeeper
Membership Co-ord - Valley
Posts: 3,397
|
Post by dan on Jun 15, 2015 19:38:57 GMT -4
Tjs also dont have that bolt hole. It was YJ specific.
Edit: maybe that isnt true, now that i think of it, i may have a tj trans in my YJ.
|
|
|
|
Post by electroguy75 on Jun 15, 2015 19:59:02 GMT -4
hole or no hole come and get it. cant go wrong its free
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Jun 15, 2015 20:31:40 GMT -4
what do you mean by orientation? T case is clocked differently from the XJ vs TJ/YJ . You can swap out the tail adapter from XJ to TJ/YJ tho |
|
gonejeepn
Jeeper
Treasurer - North Nova
NNTR-the hole tester
Posts: 2,311
|
Post by gonejeepn on Jun 16, 2015 4:24:54 GMT -4
so the tail adapter on the BA10/5 will bolt up to the AX15 from the XJ, allow'n me to use this site up on the yj? if so this can be done. thank you scott, our a man with great knowledge
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Jun 16, 2015 6:13:32 GMT -4
|
|
justajeep
Moderator
Valley - VP
Bear River, NS
Posts: 7,214
|
Post by justajeep on Jun 23, 2015 17:11:08 GMT -4
BA10 is a completely different trans from AX15, can't swap anything between the 2.
And yes Dan, you have a trans from a TJ in your YJ.
|
|
