Post by Nightpath on May 12, 2016 21:07:36 GMT -4
I'm trying to modify my XJ drivetrain to work with a mechanical speedometer in my old Eagle. Wondering if anyone has ever done this here, and could give a tip or 2.
My setup is as follows :
Full XJ drivetrain and wiring from a 1994 XJ (OBD1).
Eagle gauge cluster
I'm looking at snagging a ECHLIN VSS110 (Airtex/Wells 5S4691) possibly, but I noticed it has only 2 wires instead of 3 which I believe my current VSS has.
I'm thinking 1 of the wires goes to the PCM and another is for the speedometer. Am I correct to assume this?
My setup is as follows :
Full XJ drivetrain and wiring from a 1994 XJ (OBD1).
Eagle gauge cluster
I'm looking at snagging a ECHLIN VSS110 (Airtex/Wells 5S4691) possibly, but I noticed it has only 2 wires instead of 3 which I believe my current VSS has.
I'm thinking 1 of the wires goes to the PCM and another is for the speedometer. Am I correct to assume this?
