nickfarq5
Jeeper
99 TJ 2.5 inch lift 33s 4 banger on boggers !
Posts: 60 
|
Post by nickfarq5 on Apr 1, 2015 22:23:50 GMT -4
Hey all I'm looking to do some upgrades to my 99 tj it's a 4cyl and I'd like to get a snorkle but I can find one made for the 4cyl any body know of one that works and id also like to up grade my tires in runing 33s Roy snow I'd like to go a bit bigger and I'm looking for a really good tire so I'm looking for some input on these topics help would be great !! Thanks
Farq
|
|
nickfarq5
Jeeper
99 TJ 2.5 inch lift 33s 4 banger on boggers !
Posts: 60
|
Post by nickfarq5 on Apr 1, 2015 22:24:18 GMT -4
Rite now *
|
|
The Garagemahal
Moderator 
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Apr 2, 2015 7:11:24 GMT -4
You can edit your posts in the top right hand corner , click on the gear . Tech questions should be posted in the tech section
As for Tires , there as many different opinions as there are tires , to answer you better , what is the main use of your jeep ? 35's are a big tire for a stock axled ,4 cyl Jeep . 4.56/4.88 axle gears should be on your list of upgrades too
Best 4 cyl mod out there is a 6 cyl throttle body swap and a K&N air filter
|
|
nickfarq5
Jeeper
99 TJ 2.5 inch lift 33s 4 banger on boggers !
Posts: 60
|
Post by nickfarq5 on Apr 2, 2015 9:03:09 GMT -4
Ok sorry about that Dident know an you figer gearing and a throtal body ?
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Apr 2, 2015 11:26:56 GMT -4
Also the rear axle will eventually brake under the 35's , so get spares and carry them with you or update the rear axle
|
|
nickfarq5
Jeeper
99 TJ 2.5 inch lift 33s 4 banger on boggers !
Posts: 60
|
Post by nickfarq5 on Apr 2, 2015 11:36:53 GMT -4
If I was looking to up grade my axels what would /could I run ?
|
|
|
|
Post by 89jeep2 on Apr 2, 2015 15:12:17 GMT -4
your front will be alright.rear could be swaped for a 44 or ford 8.8.if you were to run the rear 35 you could go with cr
hromo axles.arb makes a snorkel.
|
|
nickfarq5
Jeeper
99 TJ 2.5 inch lift 33s 4 banger on boggers !
Posts: 60
|
Post by nickfarq5 on Apr 2, 2015 16:22:51 GMT -4
Ok great to know ! Do you have website for the snorkel ?
|
|
The Garagemahal
Moderator
Build Thread King
Resident Army Ranger , Navy Seal , Super-Warrior , Ninja !!
Posts: 11,518
|
Post by The Garagemahal on Apr 2, 2015 16:44:45 GMT -4
|
|
nickfarq5
Jeeper
99 TJ 2.5 inch lift 33s 4 banger on boggers !
Posts: 60
|
Post by nickfarq5 on Apr 2, 2015 19:58:59 GMT -4
whats the name of the heavyer axels that i could run in my stock danna 35 rear and im not sure what my front is ?
|
|
|
|
Post by danodonn11 on Apr 2, 2015 20:28:35 GMT -4
whats the name of the heavyer axels that i could run in my stock danna 35 rear and im not sure what my front is ? I'm not even 1/4 as knowledgeable as most of these guys, but i would assume it wouldn't even be worth getting stronger shafts for a d35, just get spares and hang on to em, until you can upgrade to a d44 or a Ford 8.8 as mentioned above. Front is a Dana30. With the 4cyl & stock gearing(4.10 in a 4cyl?)/axles, I would probably run a 33x10.5x15 or 285/75/16. but i prefer skinny tires. |
|
|
|
Post by 89jeep2 on Apr 3, 2015 6:50:37 GMT -4
superior axle,g2 and rugged ridge carries a line of axles.
|
|
nickfarq5
Jeeper
99 TJ 2.5 inch lift 33s 4 banger on boggers !
Posts: 60
|
Post by nickfarq5 on Apr 3, 2015 18:29:47 GMT -4
any one have a danna 35 or dana 44 for sale i blew the rear end outa my jeep today ... jus my luck
|
|
|
|
Post by Nightpath on Apr 5, 2015 16:13:05 GMT -4
Even a newer Chrysler 8.25 would be better than the D35 and would pretty well be a direct swap (I think, depending on year of your jeep)
Trust what these guys tell you, they've been wheeling for almost as many years as Nova Scotia has been settled.
|
|
|
|
Post by jeepfever on Apr 5, 2015 21:27:16 GMT -4
I have a 4 cyl 95 YJ riding on 33's on stock axles, kinda.
The axles are Dana30 & 35, 4.88 gears and 31 spline Chromealloy axles in the rear Dana35. I have a LockRite in the Dana30, a Detroit locker in the Dana35.
I don't drive hard and I haven't yet broken anything yet. But it will go anywhere I point it.
Myself I wouldn't consider a snorkel unless its just for show.
Deep water crossings aren't fun. Water gets in places it shouldn't be. I've seen Jeeps with snorkels get into water so deep that water actually got into the glove box too.
|
|
